The Anonymous Widower

Getlink And CargoBeamer Team Up To Launch The First Unaccompanied Cross-Channel Service By Rail

The title of this post, is the same as that of this Press Release from Getlink.

This is the first paragraph and a half.

Eurotunnel and CargoBeamer have signed a partnership which will see the launch of a new, 100% unaccompanied rail freight transport service across the Short Straits, from Calais to Ashford.

The extension of the rolling motorway from Perpignan to Ashford is a logical step in developing a future international intermodal network between the Channel and the Mediterranean. A second route from Domodossola, in the Alps region, to Calais will also be extended to Ashford after its launch in early October.

These are other points from the press release.

  • Both new railway services will prevent 8,000 tonnes of CO2 emissions.
  • They will help to partially resolve the shortage of truck drivers in the UK and Europe.
  • They will relieve traffic congestion on motorways.

It sounds like it could be a worthwhile service with more than the obvious winners.

Who Is CargoBeamer?

This is their web site and it displays an introductory video and this mission statement.

The Road to Rail Sustainable Transport Solutions

CargoBeamer use specially designed rail wagons and this page, which is entitled The Unique CargoBeamer Technology, explains how it works.

This is a claim from the web site.

As soon as the train has arrived, all semi-trailers are transferred automatically and with the simple push of a button. It takes CargoBeamer just 20 minutes to unload 36 semi-trailers from an intermodal train and load the same number at the same time. Both steps simply happen simultaneously. By comparison, a conventional crane terminal needs around three to four hours to handle such a train.

That is certainly not slow.

This video gives a full explanation about how CargoBeamer works.

Note.

  1. They can carry all types of trailers.
  2. The video shows the terminal built on a straight single-track line, where freight trains enter, load and unload and leave.

I must admit I like the design of the terminals, which they describe as Compact2 and Compact3, which gives a clue as to their design.

Their first terminal has opened in Calais and is described in this Press Release, which is entitled CargoBeamer Opens Terminal In Calais.

What Routes Are CargoBeamer Planning?

According to their web site, CargoBeamer have opened or are planning terminals at the following places.

  • Ashford – UK
  • Calais – France
  • Domodossola – Italy
  • Duisburg – Germany
  • KaldenKirchen – Germany
  • Perpignan – France
  • Poznan – Poland

Routes opened or planned include.

  • Domodossola – Calais – Ashford
  • KaldenKirchen – Domodossola
  • Perpignan – Calais – Ashford
  • Poznan – Duisburg

You can certainly understand, why Calais is their first terminal.

Serving The UK 

 

This article on Railway Gazette is entitled CargoBeamer Network Extended To The UK.

This is a paragraph.

Eurotunnnel told Railway Gazette International the aim was to build up to operating whole trains through the tunnel as the market develops, and ultimately to run trains to destinations further inland.

That seems a clear statement of intent.

Ashford could be an easy terminal to develop and I suspect it could be between Ashford and Folkestone, where the Channel Tunnel Rail Link and the M20 run close together. The compact size of the terminal would surely help.

The other sensible place for a terminal would be Barking, which can accept trains to the larger European gauge.

But it would be convenient, if trains could be run through the Channel Tunnel to places like Birmingham, Cardiff, Leeds, Liverpool, Manchester and Scotland.

Gauge clearance of routes to the European size would be a challenging, expensive and disruptive process.

But in Gauge Improvements Across London, I indicated that an enhanced gauge of W12 could be possible through London on the Gospel Oak to Barking and North London Lines.

But seeing that CargoBeamer appear to be targeting the UK, perhaps they have an innovative wagon design for services to the UK, which could have a height limit for trucks.

September 21, 2021 - Posted by | Transport/Travel | , , , , , , , ,

5 Comments »

  1. Good solution and there needs to be a bigger push in the UK to get HGV trailers moved by rail like Europe and Switzerland does with rolling motorways.

    Curious where its going to be located at Ashford though and will it have to be accessed from HS1 for clearances or will they fit up the classic route?

    Comment by Nicholas Lewis | September 21, 2021 | Reply

    • I haven’t finished the post yet, but I needed to post to test the video.

      Comment by AnonW | September 21, 2021 | Reply

  2. Don’t forget Modalohr
    I tried posting a longer article but like many others I’ve tried to submit fails

    Comment by fammorris | September 22, 2021 | Reply

  3. I didn’t realise just how many solutions there are out there all trying support the Rolling Highways concept. Apart from Modalohr, which I mentioned earlier there have been

    Comment by fammorris | September 22, 2021 | Reply

    • I can see a UK-sized system running between Holyhead and Felixstowe for a start.

      I have a feeling that the CargoBeamer system could be adapted to the UK gauge.

      Comment by AnonW | September 22, 2021 | Reply


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: