The Anonymous Widower

Abercynon Station – 28th November 2023

On Tuesday, I went to South Wales to look at the progress of the South Wales Metro.

I took these pictures at Abercynon station.

Note.

  1. The station has a wide island platform.
  2. The Aberdare and the Merthyr Tydfil branches merge here.
  3. It was rather draughty.
  4. The electrification looks to be of high quality.

This OpenRalwayMap shows the tracks through the station.

Note.

  1. Electrified lines are shown in red.
  2. Unelectrified lines are shown in black.
  3. The single-track going North is the Aberdare branch.
  4. The single-track going North-East is the Merthyr Tydfil branch.
  5. There is a crossover to the North of the station, so that trains can go where they should.
  6. The single platform is the grey-shaded area between the two tracks.
  7. The tracks are electrified to the South.

It is a neat simple station, that also allows passengers to travel between stations on different Northern branches.

The Increase In Passenger Capacity

Consider.

  • Currently, there are two Class 150/2 tph on both Northern branches.
  • This means current capacity is 596 passengers per hour.
  • After electrification, there will be four Class 398 tph on both Northern branches.
  • This means future capacity is 2016 passengers per hour.

That is an increase of 238 % in the capacity.

November 30, 2023 Posted by | Transport/Travel | , , , , , , , | Leave a comment

Climbing The Valley Lines In The South Wales Metro

There are five terminal stations on the Cardiff Valley Lines, of which four will be served by battery-electric trains or tram-trains from Cardiff.

In this post, I will show how they will achieve this feat.

Consider.

  • To get to Aberdare, Merthyr Tydfil or Treherbert, a tram-train must first get to Pontypridd.
  • To get to Rhymney, a train must first get to Caerphilly.

I will now deal with the seven stations in alphabetic order.

Aberdare

This OpenRailwayMap shows the three branches of the Cardiff Valley Lines, that go through Pontypridd.

Note.

  1. Electrified lines are shown in red and unelectrified lines are shown in black.
  2. The branch to Aberdare is the middle of the three branches.
  3. It is planned that the service on the Aberdare branch will be provided using Class 398 tram-trains, that will be fitted with batteries.
  4. Electrification will be complete between Aberdare and Pontypridd.

It would appear that a tram-train could run between Aberdare and Pontypridd using the complete electrification.

Caerphilly

These two OpenRailwayMaps show the tracks through Caerphilly.

Note.

  1. The map on the left shows infrastructure, with the Rhymney Line shown in yellow.
  2. Caerphilly station is in the top third of the map.
  3. The white section of the Rhymney Line is the Caerphilly tunnel.
  4. The map on the right shows electrification, with the sections of the Rhymney Line that will be electrified are shown in red.
  5. Black sections will not be electrified.
  6. North of Caerphilly, the Rhymney Line is electrified, but through the station and the Caerphilly tunnel, there will be no electrification.

Trains will use battery power, where there is no electrification.

Ebbw Vale Town

This OpenRailwayMap shows the Ebbw Valley Railway.

Note.

  1. Electrified lines are shown in red and unelectrified lines are shown in black.
  2. Lines where electrification will be installed are shown in red and black.
  3. Newport is marked by the blue arrow.
  4. The North-South Line at the left is the Rhymney Line.
  5. The North-South Line in the middle is the Ebbw Valley Railway.
  6. The North-South Line at the right is the Marches Line to Hereford and Shrewsbury.

Trains will use diesel power on the Ebbw Valley Railway, as there is no electrification and no means of charging battery-electric trains.

It does seem strange that no electrified solution has been proposed for the Ebbw Valley Railway.

Consider.

  • An Abertillery branch has been proposed.
  • A Newport and Ebbw Vale Town service has been proposed and will be implemented.
  • Perhaps the line is difficult to electrify.

It could just be, the electrifying the Ebbw Valley Railway, was a step too far.

Merthyr Tydfil

This OpenRailwayMap shows the three branches of the Cardiff Valley Lines, that go through Pontypridd.

Note.

  1. Electrified lines are shown in red and unelectrified lines are shown in black.
  2. The branch to Merthyr Tydfil is the rightmost of the three branches.
  3. It is planned that the service on the Merthyr Tydfil branch will be provided using Class 398 tram-trains, that will be fitted with batteries.
  4. Electrification will be complete between Merthyr Tydfil and Pontypridd, except for two short sections.
  5. I would assume that the short unelectrified sections can be handled using the tram-trains battery power.

It would appear that a tram-train could run between Merthyr Tydfil and Pontypridd using the electrification and the tram-trains batteries.

This shows the track layout at Quaker’s Yard station.

Note.

  1. Electrified lines are shown in red and unelectrified lines are shown in black.
  2. There are only two short length of electrification shown in the corners the map.
  3. Quaker’s Yard station has two platforms.
  4. The track layout appears to have single- and double-track sections.

It looks like it has been decided not to electrify this section. Perhaps, it was just too complicated to electrify easily?

This 3D Google Map shows the terminal station at Merthyr Tydfil.

It looks like the railway runs through the town to the station. So perhaps leaving out the electrification made everything safer?

Pontypridd

This OpenRailwayMap  shows the tracks through Pontypridd.

Note.

  1. Electrified lines are shown in red and unelectrified lines are shown in black.
  2. Lines where electrification will be installed are shown in red and black.
  3. The line leaving the map in the South-East corner is the line to Cardiff.
  4. The line leaving the map in the North-West corner is the Rhondda Line to Treherbert.
  5. The line leaving the map in the North-East corner is the Merthyr Line to Aberdare and Merthyr.

Pontypridd stations lies at the junction of the three lines.

This OpenRailwayMap  shows the platforms at Pontypridd.

Note.

  1. There are two long through platforms.
  2. There is a bay platform on the North side of the station for extra Cardiff services.
  3. The station is not electrified.

These pictures show Pontypridd station.

The station is Grade II Listed.

How will the tram-trains be powered through Pontypridd station?

Older Welsh railwaymen have told tales of how the coal trains from the mines in the valleys to Cardiff Docks were powered in part using gravity to propel the trains to the Docks. Steam locomotives then hauled the trains up the hills to get another load of coal.

Will Newton’s Friend be used to help the tram-trains return to Cardiff?

As the tram-trains descend, regenerative braking can be used to recharge the batteries.

A sophisticated computer control system, would choose the source of power from that which is available.

Descending from the terminal stations of Aberdare, Merthyr and Treherbert, and through Pontypridd would probably need a small amount of battery power to nudge the train to descend down the hill.

Fully-electrified stations like Aberdare and Treherbert will have the luxury of being able to use power from the electrification to start the descent.

Climbing the hills will be mainly on battery power, with the batteries being charged, where overhead electrification exists.

Rhymney

This OpenRailwayMap shows the Northern part of the Rhymney Line from Caerphilly to Rhymney.

Note.

  1. Electrified lines are shown in red and unelectrified lines are shown in black.
  2. Lines where electrification will be installed are shown in red and black.
  3. Caerphilly is marked by the blue arrow at the bottom of the map.
  4. Rhymney is at the Northern end of the rail line.
  5. Bargoed, Hengoed, Llanbradach and Caerphilly stations appear not to be electrified.
  6. It is planned that the service on the Rhymney Line will be provided using Class 756 trains, that will be fitted with batteries and diesel engines.

The Class 756 trains appear to have been designed to climb to Rhymney in all conditions, including a complete power cut. They will use batteries on the unelectrified sections of the climb.

Treherbert

This OpenRailwayMap shows the three branches of the Cardiff Valley Lines, that go through Pontypridd.

Note.

  1. Electrified lines are shown in red and unelectrified lines are shown in black.
  2. Lines where electrification will be installed are shown in red and black.
  3. The branch to Treherbert is the leftmost of the three branches.
  4. It is planned that the service on the Theherbert branch will be provided using Class 398 tram-trains, that will be fitted with batteries.
  5. Electrification will be complete between Treherbert and Pontypridd.

It would appear that a tram-train could run between Treherbert and Pontypridd when the electrification is complete.

Conclusion

Each of the five lines use their own methods of getting trains up the hills.

I suspect we’ll see some of the ideas used here on other stretches of electrification.

November 27, 2023 Posted by | Transport/Travel | , , , , , , , , , , , , , , , , | 4 Comments

Taff’s Well Station – 22nd November 2023

I took these pictures as I passed through.

Note.

  1. A depot for the tram-trains is being built.
  2. The depot looks rather small.
  3. Four Class 398 tram-trains are lined up in the sidings of the depot.
  4. The last picture was taken four years ago , before any work started.

This OpenRailwayMap shows the depot.

Note.

  1. Electrified tracks are shown in red.
  2. Unelectrified tracks are shown in black.
  3. There are nine electrified sidings, which from my picture appear to be able to hold two tram-trains each.
  4. From other pictures on the web four of the unelectrified lines are covered tracks in the depot.
  5. The final two tracks seem to allow tram-trains to enter and leave the depot and these tracks are partially covered, there could be a washer alongside the building.
  6. The unelectrified Merthyr Line runs across the South-West corner of the map.
  7. Tram-trains will always enter the depot from the North.
  8. Tram-trains will always leave the depot to the North.

It is a slightly unusual layout for a depot, but it seems to fit well into a small site.

This OpenRailwayMap shows the Merthyr Line as it passes Taff’s Well Station and Depot.

Note.

  1. The Merthyr Line runs roughly North-West and South-East across the map.
  2. The Northern and Southern sections of the Merthyr Line are electrified, but the central section is not.
  3. Taff’s Well Depot is the red and black wart on the unelectrified section of the Merthyr Line.
  4. Tram-trains going North go to Pontypridd and then on to the three branch terminals at Treherbert, Aberdare and Merthyr Tydfil.
  5. Tram-trains going South go to Cardiff Central and Cardiff Queen Street stations.

Tram-trains use a mixture of overhead electrisation, battery power and assistance from Newton’s friend for power.

How A Tram-Train Arrives At Taff’s Well Depot

Consider.

  • Tram-trains must approach Taff’s Well Depot from the North to enter the depot.
  • This shouldn’t be a problem, as there appear to be crossovers at Pontypridd to transfer a tram-train to the right line if needed.
  • As they descend from Pontypridd, any braking can be used to charge the batteries on the tram-trains.
  • The track layout in the depot appears to allow any entering train to go into any track in the depot.

So depending on the work needed before the next trip, the tram-train can be efficiently placed in the right section.

How A Tram-Train Leaves Taff’s Well Depot

Consider.

  • Tram-trains must leave Taff’s Well Depot to the North.
  • As the Merthyr Line is not electrified, where the tram-trains leave the depot, they need to leave with enough power in the battery to reach the electrified section of the Merthyr Line.
  • Tram-trains can only be charged in the nine electrified sidings.

So do the tram-trains, wait in the electrified sidings until, they have enough power in the batteries to do a circuit of the depot, join the Merthyr Line and go up the hill to the electrification?

If as I suspect, there is a tram-wash behind the depot, they can even take a pass through, so they enter service after a wash.

Conclusion

This could be a very efficient depot.

 

 

November 25, 2023 Posted by | Transport/Travel | , , , , , , , , | Leave a comment

How Many Welshmen And Welshwomen Can You Fit In A Million Pound Park-And-Ride?

This article on Insider Media, which is entitled Work On £1m Park-And-Ride Site Completes.

The Park-and-Ride facility is at Abercynon station, which is the station, where the Merthyr Line splits into two branches to Metryr Tydfil and Aberdate stations.

  • The facility has 310 parking spaces.
  • It has been built in six months after a November start.
  • Bus access will be provided at the original car park.
  • I hope they’ve increased cycle capacity for the Geraint Thomas effect.

My only worry is that with eight trains per hour to start between Abercynon and Cardiff in 2023, will the facility be big enough?

Economics

This is obviously and a much-needed scheme and each parking space has cost around £3,000. If on 250 working days, each generate around five pounds in revenue, that must mean that the car park should be viable.

Conclusion

If this Park-and-Ride facility has been built so quickly and should be viable, why is it that so few similar parking schemes are proposed for railway stations?

Especially, where at Abercynon station, there will be a massive improvement in capacity and quality of the train service.

  • A doubling of frequency
  • Faster, electric tram-trains.
  • Trains that can hold more passengers.

How many other stations are getting this improvement?

as to finance, I think this could be the sort of investment, infrastructure funds, run by the like of L & G and Aviva will be looking at..

  • Not a large investment.
  • Could be constructed to n efficient design.
  • Guaranteed return.

But in the future, when electric vehicles make up say half of all those on the road, it could become a large energy supply and storage facility.

April 5, 2019 Posted by | Energy Storage, Transport/Travel | , , , , | Leave a comment

Cardiff Queen Street Station

Cardiff Queen Street station is the first station to be refurbished for the proposed South Wales Metro.

Note.

  1. The station is fully step-free.
  2. The platforms are wide, which helps interchange or waiting for your destination. See Canada Water on the Overground and St. Pancras on Thameslink.
  3. Currently, to get to Cardiff Bay station, you need to catch a five trains per hour (tph) shuttle train from Platform 1.

The service pattern is fairly-straight-forward, with the following lines passing though the station from South to North.

It is said, that to build anything, you need good foundations.

These services through Cardiff Queen Street station, seem to be a good foundation for the South Wales Metro.

The current proposed services through the station after the Metro is completed are.

  • 2 tph – Coryton Line between Penarth and Coryton stations via Cardiff Central – Tri-Mode Stadler Flirts
  • 2 tph – Cynon Line between The Flourish and Aberdare stations.. – Stadler Citylink Metro Vehicles
  • 2 tph – Rhondda Line between Cardiff Queen Street and Treherbert stations – Stadler Citylink Metro Vehicles
  • 2 tph – Rhondda Line between The Flourish and Treherbert stations – Stadler Citylink Metro Vehicles
  • 2 tph – Rhymney Line between Barry Island and Rhymney stations via Cardiff Central – Tri-Mode Stadler Floirts
  • 2 tph – Rhymney Line between Bridgend and Rhymney stations via Cardiff Central – Tri-Mode Stadler Flirts
  • 2 tph – Rhymney Line between Penarth and Caerphilly stations via Cardiff Central – Tri-Mode Stadler Flirts
  • 2 tph – Taff Line between The Flourish and Merthyr Tydfil stations – Stadler Citylink Metro Vehicles
  • 2 tph – Cynon and Taff Lines between Aberdate and Merthyr Tydfil stations via the City Line and Cardiff Central – Stadler Citylink Metro Vehicles.

Summarising services gives these figures.

  • 6 tph – To and from The Flourish – Stadler Citylink Metro Vehicles
  • 10 tph – To and from Cardiff Central – Tri-Mode Stadler Flirts
  • 2 tph – To and from Cardiff Central – Stadler Citylink Metro Vehicles

This Google Map shows Cardiff Queen Street station.

Note.

  1. The bay platform, which is numbered 1, is in the South East corner of the station. is used for services to Cardiff Bay station.
  2. There is no North-facing bay platform.
  3. Northbound trains for Aberdare, Merthyr Tydfil and Treherbert share Platform 5.
  4. Northbound trains for Bargoed, Coryton and Rhymney share Platform 4.
  5. Sounthbound trains use Platforms 2 and 3.

I believe that this layout will be changed  in the creation of the South Wales Metro.

In an ideal world passengers should have a same-platform or cross-platform interchange between services going in the same direction.

If services going in the same direction shared the same platform, this would meet sixteen tph using two platforms, as two tph will terminate at Cardiff Queen Street station.

Canada Water station on the East London Line of the London Underground in a couple of years will be handling twenty tph.

  • The platforms are wide with escalators, lifts and stairs.
  • Four Southern destinations and Two Northern destinations are served.
  • All services are run by Class 378 trains.
  • Access between train and platform is step free and wheel-chairs and buggies can be pushed across.
  • The East London Line has modern signalling.

If Crossrail and Thameslink will be able to handle twenty-four tph with digital signalling, I believe a solution can be found so that sixteen tph can pass through Cardiff Queen Street station.

Having seen wide platforms in operation at stations like Canonbury, London Bridge and Whitechapel, I feel an ideal layout at Queen Street station would be to use Platform 3 for all Southbound services and Platform 4 for all Northbound services, with as  wide a platform as possible in between.

Consider.

  • Passengers from Rymney and Coryton needing to go to The Flourish, would get off the train and get a Citylink for The Flourish.
  • Passengers between The Flourish and Cardiff Central would just have to walk across the platform at Queen Street station to change trains.
  • Passengers needing a train to Rhoose Airport could choose to change at Queen Street station.

Most waits at Queen Street station would be in a few minutes.

Although, passengers would wait longer for Barry Island, Bridgend and Rhoose Airport.

There is still the problem about what to do with the two tph that from Treherbert that terminate at Queen Street station.

  1. They could use Platform 2 or 5.
  2. They could use a new bay platform in the North end of Pltform 3/4.
  3. They could go through Queen Street station to terminate at The Flourish
  4. They could go through Queen Street and Central stations to terminate elsewhere.

Option 1 would have problems.

  • Every thirty minutes a Citylink would have to cross the busy lines to the North of Queen Street station.
  • Passengers wouldn’t always use the same platform for the Rhondda Line.
  • Passengers wouldn’t have an easy interchange at Queen Street station.

Option 2 would be better.

  • The track layout would be similar.
  • Rhondda Line passengers would only have the inconvenience of sometimes walking along the platform.

.Even if this option was not used to turn trains, I suspect it could be built, as it would also be useful for service recovery purposes.

I like Option 3, although it will have the following consequences.

  • ,The Flourish would need to be able to handle eight tph on the two proposed platforms.
  • Queen Street station would need to be able to handle eighteen tph in both directions.

I suspect that both problems are solvable.

The problem with Option 4 is where do you turn the two extra trains?

I suspect that the Citylink vehicles can only use the City Line after Cardiff Central.

Would it be a good idea or not to run four tph on this route?

I don’t know! But a personable young station man at Queen Street station, said that handling the football can be a problem.

So perhaps more trains going to Ninian Park station might be a good idea.

I write about it in detail in The South Wales Metro and Big Events.

Conclusion

Cardiff Queen Street station has the possibility to be a World Class Metro interchange.

 

 

 

June 10, 2018 Posted by | Transport/Travel | , , , , , , , , , , , | Leave a comment