The Anonymous Widower

Waterloo Upgrade August 2017 – Feltham Station

I took these pictures at Feltham station.

Feltham station is a particular problem, as the level crossing has to be closed.

At present it is closed for preliminary works to take place, so that it can be permanently closed.

This page on the Hounslow Council web site gives more details.

August 6, 2017 Posted by | Transport | , | Leave a comment

Bombardier On Track For Record Sale Of New Aventra Trains

The title of this post is the same as the title of this article in the Daily Telegraph.

This is the last paragraph.

Aventra trains use energy efficient measures such as regenerative braking, which collects energy generated by the trains slowing down and stores it for later use. They will also offer wifi, and USB sockets in seats.

Does that mean that the trains are fitted with energy storage or in simple terms; batteries.

August 6, 2017 Posted by | Energy Storage, Transport | , | Leave a comment

The Automatic Splitting And Joining Of Trains

Hitachi And Automatic Splitting And Joining Of Trains

The Hitachi Class 395 train was the first train in the UK  to be able to automatically split and join in service.

In The Impressive Coupling And Uncoupling Of Class 395 Trains, I linked to this video.

Impressive isn’t it?

In Do Class 800/801/802 Trains Use Batteries For Regenerative Braking?, I quoted this comment from a public on-line Hitachi document.

Because the coupling or uncoupling of cars in a trainset occurs during commercial service at an intermediate station, the automatic coupling device is able to perform this operation in less than 2 minutes.

This is definitely in line with Class 395 train performance.

This document from the Hitachi web site talks about the design of Hitachi’s Class 385 trains for Scotland. This is said.

The lead and rear railcars have an automatic coupler at the front and walk-through gangway hoods. When train sets are coupled together, the hoods fit together as part of the automatic coupling operation to provide access between train sets, meaning that passengers and staff are able to move freely from one train set to another.

Obviously, Hitachi have got automatic splitting and joining of trains spot on!

Current Split/Join Services

There are several places in the UK network, where splitting and joining of trains is used.

  •  Southeastern Highspeed do it at Ashford.
  • Great Northern Kings Lynn do it at Cambridge.
  • Southern do it at Haywards Heath.
  • Virgin Trains do it at Crewe.
  • South West Trains do it at Southampton.

But currently only the Class 395 trains can do it automatically.

The in-service entry of the Class 800 trains will change everything, as it will make a lot more new routes possible.

Virgin Trains East Coast

Currently, Virgin Trains East Coast (VTEC) run two trains per hour (tph) between Kings Cross and Leeds. In the Peak, some services are extended to Bradford Forster Square, Skipton and Harrogate, where the last route is not electrified.

Will some services to Leeds be run by two five-car Class 800/801 trains working together as a ten-car train?

  • Class 800 trains are electro-diesel which could work to Harrogate under diesel power.
  • Class 801 trains are all-electric, which could work all electrified routes from Leeds.

At Leeds the two trains could separate, with each train going to a different destination. Reading Hitachi’s published documents, the split would take under two minutes at Leeds and I don’t think there would be a restriction of a Class 800 and a Class 801 working together between Kings Cross and Leeds using the overhead electrification.

VTEC gets advantages by using this split and join approach.

  • Frequencies and train length to the eventual destinations can be adjusted to what the market will sustain.
  • Extra expensive train paths between the split/join station and London are not needed.
  • Between the split/join station and London, the train can usually run using electrification.
  • Costs are probably saved, if only a half-train is run to some destinations, as track access charges are based on weight.
  • A five-car electro-diesel could probably access more routes than a nine-car train.

This is the fleet that VTEC have ordered.

  • Class 800 – 10 x five-car
  • Class 800 – 13 x nine-car
  • Class 801 – 12 x five-car
  • Class 801 – 30 x nine-car

These Class 800 and Class 801 trains give VTEC all sorts of of possibilities.

The backbone of the service which is a half-hourly service to Edinburgh probably needs about 35 nine-car trains, some of which would be electro-diesels to work North of the electrification to Aberdeen and Inverness.

But that still leaves quite a few five-car trains available for other services.

Great Western Railway

Great Western Railway (GWR) will probably use their Class 800/801802 trains in a similar manner.

This is the fleet that GWR have ordered.

  • Class 800 – 36 x five-car
  • Class 800 – 21 x nine-car
  • Class 802 – 22 x five-car
  • Class 802 – 14 x nine-car

Note that the electro-diesel Class 802 train is similar to the Class 800, but with the engines tuned for more power and larger fuel tanks, so it can handle Devon and Cornwall routes easier.

I think that given the number of five-car trains on order and the lack of promised electrification, I think that GWR will be using splitting and joining  in some surprising places, to make sure that as many routes as possible get the new trains.

The Stadler Flirt

This article on Railway Technology describes the Stadler Flirts built for Swiss Federal Railways. This is said.

The train consists of articulated train sets, which contains light rail cars attached semi-permanently sharing a common bogie. The trains are available in two to six car combinations with two to six motorised axles. The automatic couplers, installed at both the ends of the trains, permit connection and disconnection of up to four train cars easily and quickly.

Does this mean that two trains can split and join like the Hitachi trains?

The Bombardier Aventra

The Aventra is a train that has been designed to have everything that customers might need. This is the description of the train in Wikipedia.

The train has been designed to be lighter and more efficient, with increased reliability. It will have lightweight all-welded bodies, wide gangways and doors to shorten boarding times in stations, and ERTMS. The design incorporates FlexxEco bogies which have been used in service on Voyagers and newer Turbostars. The gangway is designed to allow maximum use of the interior space and ease of movement throughout the train.

As Hitachi have published a lot of their thinking on Class 800/801 trains on the Internet, I would find it astounding that Bombardier and the other train building companies haven’t read it.

There have been four orders for the Aventras so far, which total over two thousand carriages.

Two of these orders are for mixed fleets of five-car and ten-car trains.

Are these trains and half-trains just like with the Hitachi trains?

If the answer is in the affirmative, I think it is very likely that Aventras will have the capability of splitting and joining automatically.

Greater Anglia

Greater Anglia has a complex route structure that fans out from a very busy electrified core into Liverpool Street on both their main lines.

They have ordered 89 x five-car and 22 x ten-car of Class 720 trains.

Many of their outer-suburban routes currently run twelve-car services and as their two main lines are only double-track, I can see a lot of five car trains working in pairs.

In Harlow Council Leader Jon Clempner Hopes Crossrail 2 Will Extend To Town, I suggested that Greater Anglia might use splitting and joining on the West Anglia Main Line to get four tph on the Hertford East Branch.

It may not be practical in that case, but Greater Anglia have several electrified branches.

South Western Railway

South Western Railway have a similar route structure to Greater Anglia, with a very busy electrified core into Waterloo.

They have ordered 30 x five-car and 60 x ten-car of Aventra trains.

In Waterloo Upgrade August 2017 – Virginia Water Station, I talked about used splitting and joining to provide a better service on the Waterloo to Reading Line and the Chertsey Branch.

However, I think that most services will be run by ten-car trains given the make-up of the fleet.

The five-cars could generally run on routes where the capacity only needs five-car trains or the infrastructure wouldn’t allow anything longer.

They could then split and join to maximise the capacity and use only one path from the split/join station to Waterloo.

 

 

 

 

 

 

August 6, 2017 Posted by | Transport | , , , , , , , | 3 Comments