Extending The Elizabeth Line – Linking To The Chatham Main Line
Preamble
I believe that everybody in the South East of England needs the best access possible to the Elizabeth Line, by train from where they live.
- The Elizabeth Line serves the important places like Brick Lane, Canary Wharf, the City of London, Heathrow Airport, Liverpool Street station, the Olympic Park, Oxford Street and Paddington station directly.
- Because of its connection to Thameslink, the Elizabeth Line also serves important places like Bedford, Brighton, Cambridge, Gatwick Airport, Luton Airport and Tate Modern with a single change at Farringdon station.
- Using the Elizabeth Line, Thameslink and perhaps a bus, it is possible to get to most important places in Central London.
- The more passengers that use the Elizabeth Line and Thameslink, the more London’s businesses will thrive creating employment and tax revenues.
- It should also be remembered, that using a train to visit central London, probably cuts your carbon footprint.
- The Elizabeth Line also cost a fortune, so perhaps by using it, you will be getting some of your portion of what it cost you back.
This post is one of several, where I discuss how to bring more passengers into the Elizabeth Line network.
The Chatham Main Line
This is the introduction to the Wikipedia entry for the Chatham Main Line.
The Chatham Main Line is a railway line in England that links London Victoria and Dover Priory / Ramsgate, travelling via Medway (of which the town of Chatham is part, hence the name).
Services to Cannon Street follow the route as far as St Mary Cray Junction where they diverge onto the South Eastern Main Line near Chislehurst.
Thameslink services to Luton run in parallel from Rainham to Rochester, diverging once across the River Medway at Rochester Bridge Junction onto the North Kent Line via Gravesend and Dartford.
A shuttle service operates on the Sheerness Line which starts at Sittingbourne.
Note.
- The main London terminals for trains to London on the Chatham Main Line are Cannon Street (Peak only), St. Pancras and Victoria.
- Services stop at Rainham station, so passengers can change to the two trains per hour (tph) Thameslink service to Luton.
- St. Pancras has one tph from Strood, Rochester, Chatham, Gillingham, Rainham, Sittingbourne and Faversham stations.
- Victoria has two tph from Strood, Rochester, Chatham, Gillingham, Rainham, Sittingbourne and Faversham stations.
- Rochester, Gillingham, Rainham and Faversham can turnback trains to London.
The only connections to the Elizabeth Line are.
- The HighSpeed service to St. Pancras calls at Stratford International, where the connection is tortuous.
- The Thameslink service calls at Farringdon, where the connection is easy.
As an example say you were going from Chatham to Heathrow Terminal 4.
The National Rail timetable suggests this route.
- Southeastern HighSpeed – Chatham to St. Pancras
- Thameslink – St. Pancras to Farringdon
- Elizabeth Line – Farringdon to Heathrow
Note that the change at St. Pancras is not the easiest.
Extending The Elizabeth Line To The Chatham Main Line
In Elizabeth Line To Ebbsfleet Extension Could Cost £3.2 Billion, I talk about this proposal as described in this article on Ian Visits.
One of the key features of Crossrail To Ebbsfleet (C2E) project is that instead of all trains terminating at Abbey Wood, trains will terminate as follows.
- Abbey Wood – 4 tph
- Northfleet – 4 tph
- Gravesend – 4 tph
This will mean that 8 tph would pass through Abbey Wood station.
Gravesend is not the best place to turn trains, so why not turn two tph at somewhere like Rochester, Gillingham, Rainham or Faversham?
If two tph to Rainham is good enough for Thameslink, surely two tph to Faversham could be good enough?
Extending The Elizabeth Line To A New Hoo Station
In Effort To Contain Costs For Hoo Reopening, I discussed opening the new Hoo station.
Consider.
- Hoo junction to Hoo station is no more than five or six miles.
- Aventras have been designed to run on battery power, so I suspect Lizzie’s Class 345 trains could be so fitted.
- Range would be sufficient for one return trip from Hoo junction to Hoo station
- Two tph at Hoo station could be handled by a single platform.
It looks to me, that of the four tph to Gravesend if C2E is built, two tph could go to both of Hoo and Faversham.
This assumes of course that digital signalling can fit all the trains on the North Kent Line between Abbey Wood and Faversham.
Chatham And London Main Line Stations
In these routes, I am assuming that there are two tph on the Lizzie Line between Faversham and Heathrow.
- Chatham and Cannon Street – Lizzie Line to Whitechapel and then District Line
- Chatham and Charing Cross – Lizzie Line to Whitechapel and then District Line
- Chatham and Euston – Lizzie Line to Whitechapel and then Hammersmith & City Line
- Chatham and Farringdon – Lizzie Line direct – Thameslink direct
- Chatham and Fenchurch Street – Lizzie Line to Whitechapel and then District Line
- Chatham and Liverpool Street – Lizzie Line direct
- Chatham and Marylebone – Lizzie Line to Paddington and then Bakerloo Line
- Chatham and Paddington – Lizzie Line direct
- Chatham and Kings Cross – Thameslink direct – Lizzie Line to Whitechapel and then Hammersmith & City Line
- Chatham and St. Pancras – Thameslink direct – Southeastern HighSpeed direct
- Chatham and Victoria – Southeastern direct – Lizzie Line to Whitechapel and then District Line
- Chatham and Waterloo – Lizzie Line to Paddington and then Bakerloo Line
Note how Whitechapel is an important interchange, as I said in Whitechapel Station Is The Preferred Interchange.
Conclusion
I do believe that the Elizabeth Line could be successfully extended to Kent.
HS2 Tech Incubator Bases Start-Ups On Site
The title of this post, is the same as that of this press release from HS2.
This is the introductory paragraph.
The latest cohort of the successful Innovation Accelerator initiative will base tech start-ups with project’s main civil engineering contractors to help tailor innovative solutions for the construction industry.
After discussing the aims, the press release then lists five SMEs.
Silicon Microgravity, a SME spun out from Cambridge University research, is developing non-invasive next-generation gravity sensors to identify underground hazards that could be deployed for ground investigation surveys and utility diversion planning.
EHAB is developing hyper-local weather forecasting and using A.I. to optimise daily works schedules according to when or if rain is due. Reducing weather-related delays helps to maintain programme timetables and control costs.
Immense Simulations will further develop its A.I.-based strategic and operational transport planning tool to de-risk the effects of works traffic on local road networks. The technology could also help plan for the effects future that HS2 stations could have on traffic movements in surrounding areas.
Consequence has developed “carbon accounting” technology that illustrates the full carbon content of construction materials used on HS2.
Mafic is developing technology to enhance productivity and protect delivery schedules.
My experience of science, data analysis and writing a lot of database and project management software, leads me to the conclusion, that these companies have been well-chosen and a majority will be a success.
Former US President Donald Trump Launches $99 NFT Trading Cards
The title of this post is the same as that of this article on the BBC.
Under images of two of the cards, one showing him as a roughneck with a shotgun and the other as a superhero, this is the first paragraph.
Former US President Donald Trump has launched a collection of digital trading cards depicting him in various guises including a superhero, astronaut and Nascar driver.
In the superhero picture he has a T on his chest.
I would think a W with an anchor would have been more appropriate.
Ducking And Diving Between Moorgate And Liberty
Liberty is one of my favourite shops. That probably dates from the times in the 1970s, when C and I didn’t have large amounts of money and three kids, so if she needed a new summer dress, I’d make it and we’d usually choose the fabric at Liberty.
I was doing some Christmas shopping today, so after breakfast at Leon on Moorgate, I jumped into the Lizzie Line to the Hanover Square entrance at Bond Street station, where it was a short walk to Liberty.
These pictures document the route.
Note.
- I took one stop on the Metropolitan Line from Moorgate to Barbican.
- I positioned myself, at the front of the train.
- This enabled me to take the lift at Barbican station to the Lizzie Line passenger interchange level at Farringdon station.
- I then got the escalator down to the platforms.
- I was able to get into the back of the Westbound train, which I needed to avoid a long walk at Bond Street station.
The Lizzie Line will bring out the best ducking and diving in us all.
But with my manoeuvres, I avoided a two hundred metre walk from one end of the train to another!
This Google Map shows my walking route from Bond Street station to Liberty.
Note.
- Hanover Square is the green space to the left of the map.
- The Hanover Square entrance to Bond Street station is in the North-West corner of the square.
- Liberty is at the far right of the map.
Advantages of this route include.
- The Western end is in one of London’s best squares.
- All major road crossings have zebras or light controlled crossings.
- There are a few smaller useful shops like itsu, a Pret and a Ryman on Hanover Street.
- The route wasn’t too busy with pedestrians.
I would recommend using the Hanover Square entrance to Bond Street station for places like Bond Street, Carnaby Street, John Lewis, Regent Street and The Palladium.
After I’d done my shopping at Liberty, I walked along Great Marlborough Street to the back entrance of Marks and Spencer’s flagship store, thus avoiding the crowds on Oxford Street.
What If I Want To Go To John Lewis On Oxford Street?
As for Liberty, you would take the Lizzie Line to Bond Street station and use the Hanover Square or Eastern exit, then follow these pictures.
Note the Leon, which will probably opening soon.
What If I Want To Go To Bond Street?
You take the Medici Courtyard by the side of the station.
Note.
- There is an upmarket hotel in the courtyard.
- The courtyard has some artwork.
- The floral entrance on Bond Street.
It will be interesting to see how the Medici Courtyard develops.
ERM To Lead EIA For Salamander Floating Project Offshore Scotland
The title of this post, is the same as that of this article on offshoreWIND.biz.
This is the sub-heading.
A joint venture (JV) between Simply Blue Group, Ørsted, and Subsea7 has selected ERM Group company MarineSpace to lead the environmental impact assessment (EIA) for its Salamander floating offshore wind project in Scotland.
Note.
- The Salamander floating offshore wind farm is going to be a 100 MW wind farm 35 km. North of Peterhead.
- It is likely to be a pathfinder, in the development of new facilities to build wind farm structures and components in the North of Scotland.
- I talked about the floaters in Ocergy Floaters Selected For 100 MW Project Off Scotland.
- I suspect that it could be an INTOG project.
Salamander seems to be progressing at a decent pace.
Electrolyser System To Linde For Green Hydrogen Production In Niagara Falls, New York
The title of this post, is the same as that of this press release from Cummins.
This is the first paragraph.
Cummins Inc. will supply a 35-megawatt (MW) proton exchange membrane (PEM) electrolyzer system for Linde’s new hydrogen production plant in Niagara Falls, New York. Once commissioned, Cummins’ electrolyzer system will power Linde’s largest green hydrogen plant in the U.S., marking significant progress in moving the green hydrogen economy forward.
Note.
- The electrolyser will be powered by hydroelectricity.
- Linde have a strategic investment in iTM Power, who are a British manufacturer of electrolysers.
- ITM Linde Electrolysis is a joint venture between iTM Power and Linde.
Why did Linde choose Cummins over iTM Power?
Is it down to cost, delivery, politics or quality?
Would Southeastern’s Proposed Battery-Electric Trains Be More Reliable In The Snow?
This article on CityMonitor, which is entitled No Trains South Of London During Cold Weather? Blame A Pair of Herberts For Choosing The Wrong Electrical System, explains it all.
The article was written in 2018 and these are the first two paragraphs.
As is often the case when the weather is below freezing, commuters around London are having a terrible time this week. The blizzard has hit services on all lines around the capital. Trains running towards the south and southeast have had the worst of it, with services cancelled on Monday before the full impact of the storm really hit.
It’s frustrating to compare the UK’s lack of readiness when extreme weather hits with services in Switzerland or Sweden, which cheerfully run in heavy snow conditions.
The article blames the poor performance on South London’s third rail electrification, which as the title suggests was chosen by a couple of Herberts.
Does anybody know of a child in the last fifty years, who has been called Herbert?
I shouldn’t be too hard on Herberts, as my paternal grandfather was a Herbert. But he was an alcoholic and died before he was forty.
Hydrogen Corolla Cross Begins Testing In Japan
The title of this post, is the same as that of this article on Toyota UK Magazine.
These two introductory paragraphs outline Toyota’s plans for hydrogen.
Toyota’s approach to carbon neutrality is to develop and offer multiple technologies to support widely varying customer needs and market environments around the world. This multi-technology approach – which includes battery electric and fuel cell electric and plug-in hybrid electric and hybrid electric vehicles – is witnessed in the company’s development of a new hydrogen car powered by a hydrogen combustion engine.
Toyota firmly believes it is too early to focus on a single zero-emission solution and is therefore concurrently developing hydrogen fuel cell and hydrogen combustion technology alongside battery electric technology. Today’s announcement follows last week’s confirmation that Toyota Motor Manufacturing UK will lead a consortium developing a hydrogen fuel cell version of the Hilux pick-up at its Burnaston car plant in Derbyshire.
This paragraph gives more details of the car.
This version of the mid-size Corolla SUV* is powered by the 1.6-litre, three-cylinder turbocharged engine featured in the GR Corolla* performance model, re-engineered with high-pressure hydrogen direct injection technology. The prototype is also fitted with hydrogen fuel tanks, packaged with know-how gained from the development of the Toyota Mirai fuel cell electric saloon. The prototype is able to accommodate five passengers and their luggage. Real-world evaluation is being carried out alongside digital development, and the vehicle will soon undergo winter testing in northern Japan.
I must admit, that if I still drove, this type of vehicle with a hydrogen internal combustion engine, would be what I’d buy.
Edvard Grieg And Ivar Aasen Runs On Power From Shore
The title of this post, is the same as that of this press release from Aker BP.
This is the first paragraph
The Edvard Grieg and Ivar Aasen production platforms on the Utsira High area in the North Sea are now operated with electric power from shore. Two gas fired turbines have been shut down, and thus we achieve a significant reduction in emissions of greenhouse gases.
This is surely the way to power offshore assets.
Why Don’t I Feel The Cold?
It’s been cold today in London, but I didn’t really feel it.
The Anonymous Widower 