Penistone Line – 15th December 2023
I took these pictures on the Penistone Line today.
Note.
- I started at Sheffield station and travelled to Huddersfield station, before returning to Sheffield on the next train.
- The trains run hourly.
- There are 15 stops.
- The route had good views but it didn’t seem the train worked that hard.
- The route is 36.4 miles and trains are timed to take 75 minutes.
- That is an average speed of 29.1 mph.
- Most services were run by two car Class 150 trains, but some were run by three-car trains.
- The two trains I used were well patronised.
I have some thoughts and observations.
Could The Service Be Run Faster?
Consider.
- 29.1 mph doesn’t seem very fast.
- The maximum speed is 50 mph or less in places.
- The line North of Barnsley is single-track with passing loops at Penistone and Stocksmoor.
- Some of this single-track is on top of high viaducts, so could be difficult to double.
- Between Barnsley and Sheffield is double-track.
- To do the journey in an hour would need an average of 36.4 mph.
- Typically, Greater Anglia run their Class 755 trains at 34-36 mph.
As the Penistone Line has 15 stops, an electric train with faster acceleration and deceleration might be ideal for the route.
But I suspect it would be tight, but possible to do the journey in an hour.
Help And Money Is On Its Way!
This article on Kirkless Together is entitled £48million Funding Boost To Get Penistone Rail Line On The Right Track.
This is the first paragraph.
The government have just announced that we’ve been successful in a bid to their Levelling Up Fund for £48million, to support major improvements to the Penistone rail line.
That certainly sounds like a good start.
The article sums up what the funding means like this.
This funding means we’ll be able to improve the infrastructure along this rail line, and improve access as well. This will make the Penistone line a really important link between Huddersfield, Barnsley and Sheffield!
Improvements are outlined in this paragraph.
It will include station improvements creating better access and waiting facilities, increasing the speed of travel along the line and upgrading the rail infrastructure – including doubling sections of track, which will allow for two trains to travel on the northern section of the line every hour, in both directions.
Note.
- I feel that the current track layout could allow a theoretical two trains per hour (tph) service North of Barnsley, if both passing loops at Penistone and Stocksmoor were to be used.
- But it might not be very resilient to late trains and other problems, so extra double-track might be desirable, if it made the route more reliable.
I would expect that if possible, the improvements would allow trains to go between Sheffield and Huddersfield in an hour, as that would definitely attract more passengers to the service.
Could Battery-Electric Trains Run The Service On The Penistone Line?
Consider.
- Both Sheffield and Huddersfield stations will be electrified in the next few years, so the power supplies will be able to support charging of battery-electric trains.
- Sheffield and Huddersfield is only 36.4 miles.
- Hopefully, the track improvements would make the route less severe.
- The Penistone Line is self-contained with no other services on much of the route.
- There is time to charge the train at each end of the route.
In an article in the October 2017 Edition of Modern Railways, which is entitled Celling England By The Pound, Ian Walmsley says this in relation to trains running on the Uckfield Branch, which is not very challenging.
A modern EMU needs between 3 and 5 kWh per vehicle mile for this sort of service.
I don’t think the terrain of the Penistone line is much different from the Uckfield branch, so what are the figures for a three-car-battery electric train?
The answer would appear to be somewhere between 328 and 546 kWh.
According to the data sheet is now on the Stadler web site, the battery size of a Class 777 train is 320 KWh.
I feel that an off the shelf battery electric train could work the Penistone Line.
Could Tram-Train Operation Be Used?
Consider.
- A Sheffield tram driver told me that Sheffield’s Class 399 Tram-Trains are excellent on hills.
- The cousins of the Class 399 Tram-Trains run a similar service between Karlsruhe and Baden-Baden in Germany on bigger hills.
- Battery-electric Class 399 Tram-Trains are available and are being tested in Wales.
- Sheffield station handles Huddersfield services straight into one of two single bay platforms.
- Huddersfield station handles Sheffield services straight into a single bay platform.
- Major improvements to the Penistone Line will allow two trains per hour on the line.
I suspect if two trains per hour can be run using using diesel multiple units operating as a shuttle, then battery-electric Class 399 tram-trains could do the same.
A Tourist Tramway Across The Pennines
I feel there are possibilities to run tram-trains between Huddersfield and Manchester Piccadilly via Meadowhall and Sheffield stations.
This would create a unique tourist tramway across the Pennines.
Huddersfield’s magnificient Grade 1 Listed station is being upgraded and electrified.
The Hope Valley Line has been upgraded in the last couple of years.
Through Sheffield will be upgraded and electrified for the Midland Main Line.
Stadler have built vehicles for lines like these in many places.
This could be the spectacular attraction that the North-Centre of England needs.
Statkraft To Acquire Major Loch Ness Pumped Storage Hydro Project From Intelligent Land Investments Group
The title of this post, is the same as that of this press release from Statkraft.
This is the sub-heading.
The acquisition demonstrates Statkraft’s latest commitment to helping Scotland meet its renewable energy targets and strengthening UK energy security
These two paragraphed outline Red John and the deal.
Statkraft, Europe’s largest renewable power generator, has agreed to acquire the Red John Pumped Storage Hydro Scheme, from Intelligent Land Investments Group (ILI).
The 450MW scheme, first conceived in 2015, was granted consent by Scottish Government ministers in June 2021. The acquisition demonstrates Statkraft’s latest commitment to helping Scotland meet its renewable energy targets and strengthening UK energy security.
Note.
I wrote about Red John in Red John Pumped Storage Hydro Project.
I have also found a web site for the project, where this is said.
- The scheme has an output of 450 MW.
- The storage capacity is 2,800 MWh or 2.8 GWh.
- The scheme has planning consent.
- The project is budgeted to cost £550 million.
- The construction program indicates that the scheme will be completed by the end of 2025.
It looks to me, that the ILI Group have done all the hard work in getting the project shovel-ready and are passing the project to a bigger developer.
Huddersfield Station – 15th December 2023
I took these pictures at Huddersfield station today.
Note.
- The station is a Grade I Listed building.
- The station will be fully-electrified under the TransPennine Upgrade.
- St. George’s Square in front of the station is pedestrianised.
- There is a pub in each wing of the station.
This OpenRailwayMap shows the tracks between Huddersfield and the next station to the East; Deighton.
Note.
Huddersfield station is in the South-West corner of the map, where the tracks lead to Manchester.
Deighton station is in the North-East corner of the map, where the tracks lead to Leeds.
The tracks between the two stations will be electrified as part of the TransPennine Upgrade.
This second OpenRailwayMap shows the layout of platforms and tracks in Huddersfield station.
Currently, there are the following platforms.
- Platforms 1, 4 and 8 are through platforms.
- Platform 2 is a bay platform at the Manchester end of the station is used by trains on the Penistone Line to Sheffield.
- Platform 5 and 6 are two bay platforms at the Leeds end of the station, that are used by services to and from Bradford Interchange.
The Wikipedia entry for Huddersfield station says these changes will be made under the TransPennine Upgrade.
Work is underway on Network Rail’s Transpennine Route Upgrade project, which will see electrification of the Huddersfield Line, allowing many of the services through the station to switch to newer, faster electric rolling stock. As part of this project the signal box on platform 4 which was decommissioned previously will be removed, its control area already passed to the York Rail Operating Centre as a part of the Huddersfield Re-signalling project. To match the quadrupling of the line north of Huddersfield, the project will in effect split the existing island platform, extending the existing bay platforms 5 and 6 to form two new through platforms covered by a new roof, and add a new footbridge at the Leeds end. The process will also include relocating the 1880s island platform tea room, and rotating it through 180 degrees.
It looks like the functionality of the station for passengers, staff and operators will be upgraded to the level of style of the station.
Performing The Upgrade
I learned today, that during some parts of the upgrade work, Deighton station will be used as a temporary station for Huddersfield.
TCP Is Using Hydrogen To Create Cleaner Construction Sites
The title of this post, is the same as that of this article on the Eastern Daily Press.
This is the sub-heading.
Air and noise pollution are challenges for every construction project. For green energy infrastructure developers especially, cutting emissions is a pressing conundrum.
These are the first four paragraphs.
Large-scale construction demands diesel-guzzling heavy plant and noisy diesel generators powering off-grid site work for years before a project generates its first clean energy.
Back in 2012, Andrew Barker identified hydrogen as a fuel of the future and a solution to pollution issues during construction projects in his Essex-based family business, Taylor Construction Plant (TCP Group).
His concerns about health issues caused by carbon emissions, combined with a drive to make a difference, led to game changing inventions using hydrogen to transform power for site operations – making sites better neighbours, with fewer health dangers to site workers and helping the drive against climate change.
He developed his first hydrogen powered product more than a decade ago – mobile lighting towers that are the flagship product for the business and first choice for building and maintenance projects across the UK on the mission to net zero.
It appears now Andrew Barker has a strong business, which can be found at this web site.
GE’s Recently Unveiled 18 MW Wind Turbine To Spin Offshore Japan
The title of this post, is the same as that of this article on offshoreWIND.biz.
This is the sub-heading.
The three consortia that Japan’s Ministry of Economy, Trade, and Industry (METI) selected in the country’s second round of offshore wind auctions will use some of the biggest and most powerful wind turbines on/coming to the market – Vestas V236-15 MW and GE’s 18 MW Haliade-X.
Wind farms under construction or in pre-construction in the UK, as I write this post, include.
- Neart Na Gaoithe – 8 MW x 54 – 450 MW
- Sofia Offshore Wind Farm – 14 MW x 100 – 1400 MW
- Dogger Bank A – 13 MW x 95 – 1235 MW
- Moray West – 15 MW x 60 – 882 MW
- Dogger Bank B – 13 MW x 95 – 1235 MW
- Dogger Bank C – 14 MW x 87 – 1218 MW
- East Anglia Three – 14 MW x 95 – 1372 MW
- Hornsea Three – xx MW x 231 – 2852 MW
Note.
- I can’t find the turbine size for Hornsea Three.
- This article on The Telgraph is entitled Ørsted Asks For More Government Cash Amid Doubts Over Flagship Wind Farm Project, says that Ørsted and Claire Coutinho are talking.
- The total power is 10644 MW.
- There are a total of 817 turbines.
- This is an average turbine size of almost exactly 13 MW.
There would appear to be scope to increase the size of these wind farms by using the new larger turbines.
Just uprating the turbines to 15 MW would increase capacity by 15 %.
The frequency of stories like these are increasing.
Crown Estate Mulls Adding 4 GW Of Capacity From Existing Offshore Wind Projects
Vattenfall Boosts Capacity For Norfolk Offshore Wind Zone
Three Steps To Unlocking The Potential Of High-Power Wind Turbines
Ossian Floating Wind Farm Could Have Capacity Of 3.6 GW
Developers are seriously thinking of building or upgrading wind farms with larger turbines and other capacity-increasing technology.
The Proof Of The Pudding
In A December Treat For £3.70, I talked about buying English strawberries in Marks & Spencer in December.
I said I’d post again, when I ate them.
This picture shows the pack on a plate.
And this a close-up of a single strawberry, which cost 37 pence.
I’m afraid the photos don’t do justice to their taste, as they were definitely some of the best strawberries, I’ve ever eaten.
I did buy another two punnets this morning, to see me through the weekend.
Dyson Farming has a web page, which describes how they produce the strawberries.
The page contains an explanatory video, which is well worth a watch.
Will developments like this be the future of farming?
Floating Solar Not Yet Up to Par To Be Brought Into Offshore Wind Tenders, Says BP’s Benelux Head Of Offshore Wind
The title of this post, is the same as that of this article on offshoreWIND.biz.
This is the sub-heading.
System integration is what is needed for the next leap in offshore wind, however, not all technologies that can integrate with offshore wind farms have the same starting point. Floating solar still has some way to go in becoming more resilient to harsh offshore conditions. On the other hand, hydrogen is a more ready option with plenty of support from the industry, but it needs to be included and clearly defined in offshore wind tenders.
These two paragraphs describe the views of Frank Oomen, Head of Offshore Wind Benelux at BP.
This is according to Frank Oomen, Head of Offshore Wind Benelux at BP, who discussed financial and qualitative criteria in offshore wind auctions during the Offshore Energy Exhibition & Conference 2023 (OEEC 2023).
Speaking about recently joining BP from the renewables industry, Oomen pointed out that, with offshore wind becoming larger scale, it needs to move in the direction of system integration and become an integrated energy business itself.
I had a lot of my engineering education, in ICI’s world of integrated chemical plants and I believe that Frank Oomen’s views are heading in the right direction.
If we take Frank Oomen’s views to their logical conclusion, we will see the following.
- Clusters of wind farms far from land in productive wind power areas.
- A nearby electrolyser will be producing hydrogen.
- The hydrogen will be taken to the shore by pipeline or tanker.
- BP with their oil and gas heritage, have been doing this for decades.
BP might even have some redundant gas infrastructure they can repurpose.
Guardian To Use Hydrogen In Its Glass Manufacturing
The title of this post, is the same as that of this article on Glass International.
These two paragraphs introduce the application.
Ryze Hydrogen has signed a long-term deal to provide hydrogen to flat glass manufacturer, Guardian Glass
Ryze will supply hydrogen to be used in the manufacture of float glass, which is used in everything from car windscreens and windows in buildings to mirrors and furniture.
This extract from the article explains how the hydrogen is used.
It will be used as a technical gas during the float glass process.
Chris Duguid, Plant Manager from Guardian Glass, said: “We are really pleased to be starting this partnership with Ryze.
“Hydrogen is vital to our float glass production process. Hydrogen is used to create an oxygen-free environment as a blanket to avoid oxidation of the tin onto which we float molten glass.
“As this is needed 24-hours-a-day, seven-days-a-week, 365-days-a-year, it is absolutely critical that we partner with a reliable supplier, which is what we have with Ryze.”
This Wikipedia section, describes the manufacture of float glass.
I’ve never come across a use for hydrogen, where the gas is used for its physical properties and not burned for heat.
How many other applications like this, will the ready availability of hydrogen open up?
I wonder, if the next step will be to use hydrogen to heat the tin and create the actual glass, so that Guardian Glass will be able to make zero-carbon glass.
As the temperatures required are over a 1000 °C, this process could use a lot of hydrogen.
As Guardian Glass are based at Goole, I suspect that they’ll be able to get a hydrogen pipeline from the electrolyser, that SSE are building on Humberside.
SSE Comments On COP28
The title of this post is the same as that of this press release from SSE.
SSE Chief Executive, Alistair Phillips-Davies, said:
“We knew going into COP28 that the world wasn’t moving fast enough to decarbonise. The commitment to triple renewables by 2030 is welcome, as is the inclusion, for the first time, of explicit language on the need to transition away from fossil fuels.
“Codifying and securing international endorsement for ambitions like these is very welcome; however, the challenge now is to deliver the tangible actions needed to make them a reality.
“In the power sector, this means speeding up policy and decision-making so that it is easier to invest and build the infrastructure we need to actually deliver net zero, from offshore wind farms to electricity grids and flexible power plants.
“At COP28 there was no shortage of businesses willing to invest but there was a common frustration at the pace of progress on the ground, and this is something we need to address for all our sakes.”
I would agree with what he said.
- Especially about speeding up policy and decision-making and delivering more electricity grids.
- The last paragraph probably applies to a lot of countries.
Surprisingly, energy storage is not mentioned.
Could that be because SSE are going down the route, where hydrogen is created and that is either used in gas-guzzling industries to reduce their carbon-emissions or stored until needed?
SSE Thermal Acquires 50% Stake In H2NorthEast Hydrogen Project
The title of this post is the same as that of this press release from SSE Thermal.
These are the first three introductory paragraphs.
SSE Thermal has become joint owner of a blue hydrogen project in Teesside which is set to play a major role in supporting a reliable decarbonised power system by 2035 and accelerating industrial decarbonisation.
The partnership with Kellas Midstream will see the companies jointly develop H2NorthEast, a hydrogen production facility with carbon capture and storage that could help to kickstart a hydrogen economy in the Tees Valley. The agreement is for an initial consideration of <£10m to Kellas Midstream with further contingent consideration due should the project reach a financial investment decision.
In its first phase, H2NorthEast could deliver up to 355MW of blue hydrogen production capacity from 2028 with plans to scale up to more than 1GW. Offtakers would include heavy industry and power generation, either through blending into existing assets or in new hydrogen-fired plants.
Note.
- Production of 355 MW of hydrogen could start in 2028.
- Several existing processes have been converted from gas-firing to hydrogen-firing or a blend of natural gas and hydrogen firing. See Lime Kiln Fuelled By Hydrogen Shown To Be Viable.
- Teesside has quite a few industries, like steel and chemicals that theoretically could be converted to hydrogen or a hydrogen blend.
I have some thoughts.
Carbon Capture And Storage
This paragraph in the press release talks about the carbon capture and storage.
With an anticipated minimum carbon capture rate of 97%, H2NorthEast meets both UK and EU low-carbon standards. Specifically, the hydrogen produced via H2NorthEast would be fully compliant with both the UK’s Low Carbon Hydrogen Standard and is expected to be aligned with the EU Taxonomy for sustainable activities.
If the plant can achieve a carbon capture rate of 97 %, that is very good and it appears to meet the required standards.
- I also feel, that if it is of a high purity, then that could be a bonus, as it could be used in food manufacturing and other processes, where high purity is needed.
- I feel SSE should endeavour to use as much of the carbon dioxide, as it can to produce valuable by-products, which could include cement substitutes, building blocks, plasterboard and animal feed.
- Carbon dioxide can also be fed to soft fruit, salad vegetables, tomatoes, flowers and other plants in giant greenhouses or vertical farms.
- Polyester yarn can also be made from carbon dioxide.
It is my belief that this list of products will grow in the next ten years and carbon dioxide of a high purity will become an important chemical feedstock.
Replacement of Blue Hydrogen With Green
If SSE Renewables were to build an electrolyser near to H2NorthEast, they could use that to replace the blue hydrogen.
- From an offtaker’s point of view green and blue hydrogen would be identical.
- It’s just that the green hydrogen doesn’t produce any carbon dioxide.
- I can see the complex being run to produce enough carbon dioxide to supply the users that need it and producing blue and/or green hydrogen accordingly.
Hopefully, the more uses that can be found for the carbon dioxide, the less of it will need to use long-term storage.
Expanding The Plant
As blue and green hydrogen plants create an identical product, the decision of whether to add an extra blue hydrogen or green hydrogen plant can be taken solely on financial grounds.
Conclusion
This looks like it could be a very sensible decision by SSE.
The Anonymous Widower 