The Anonymous Widower

Freight Trains Through Lincoln Station

I must have spent nearly ninety minutes in total at Lincoln station yesterday and in that time, at least four long freight trains went through.

The reason is that Lincoln station lies on the Great Northern and Great Eastern Joint Line, which is a major freight diversion between Doncaster and Peterborough.

  • It appears to me, that more freight trains are now using this route since the opening of the Werrington Dive Under.
  • All were hauled by a noisy and polluting diesel Class 66 locomotive.
  • Some were hauling as many as forty containers.

Articles like this one on Lincolnshire Live, which is entitled Who Had The Crazy idea to Let Trains Run Right Through Lincoln City Centre?, which contains this paragraph.

Then, you’re left with a decision over whether you take your own life in your hands by scuttling over the crossing as fast as you can before being trapped by the barriers, climbing the stairs of one of the two footbridges, or simply waiting at the barrier for the trains to pass (and God help you if it’s one of those freight trains with a seemingly endless amount of carriages).

New footbridges have been installed over the railway, as I wrote about in The Footbridges Over The Railway At Lincoln. But is that enough?

Diesel locomotives are not the most friendly of neighbours and the sooner we start to replace them with quieter locomotives the better.

Lincoln is not the only place, that is plagued by Class 66 locomotives.

  • Near me, the North London and Gospel Oak to Barking Lines are regularly used by freight trains hauled by diesel locomotives, despite being electrified.
  • Diesel locomotives regularly use the Castlefield Corridor through Manchester.

There must be other places, which suffer from these beasts.

 

June 29, 2023 Posted by | Transport/Travel | , , , , , , , | 2 Comments

What Will Be The Range Of A Hitachi Class 800 Battery Train?

I feel now, I have enough information to make an educated, at what the distance a five-car Class 800 or Class 802 train will travel on batteries.

Previous Battery-Electric Trains

These are examples of previous distances.

  1. A Bombardier engineer told me eight years ago, that the battery-electric Class 379 had a range of sixty miles.
  2. Stadler’s FLIRT Akku has a Guinness world record of 139 miles on one battery charge. See this page on the Stadler web site.
  3. Even Stadler’s Class 777 trains for Merseyrail have a range of 84 miles on battery power. See New Merseyrail Train Runs 135 km On Battery.

It does appear that five-car battery-electric trains will have ranges in excess of a hundred miles.

Engineering Ambition

Several times in my life, I’ve got fired up about engineering or software projects and I like to think, I’ve produced the best and fastest solution.

For this reason, I believe that Hyperdrive Innovation, who are now part of Turntide Technologies, and Hitachi will set themselves three objectives with the design of the the battery packs for the Class 800 or Class 802 train.

  • The battery-electric Class 802 will outperform the Stadler FLIRT Akku in terms of speed and distance.
  • The battery packs will be plug-compatible with the diesel engines, so there will only be minor software modification to the trains.
  • The train will be able to be handle all Great Western Railway’s routes without using diesel.
  • I wouldn’t be surprised that on many routes the train will cruise at over 110 mph on batteries.

I also suspect they want the Akku’s Guinness world record, which will mean the range will be in excess of 139 miles.

More On LNER’s Ten New Bi-Modes

I wrote about these trains in LNER Seeks 10 More Bi-Modes.

This was my conclusion.

There is a lot of scope to develop LNER’s services.

I think it is likely that the order will go to Hitachi.

But as I indicated, I do believe that there is scope for a manufacturer to design a zero-carbon train, that was able to serve Aberdeen and Inverness.

  • I suspect a fleet of ten trains would be sufficient.
  • Trains would use the 25 KVAC overhead electrification, where it exists and hydrogen or battery power North of the wires.

The trains would also be capable of being upgraded to higher speeds, should the East Coast Main Line be turned into a High Speed Line.

I also think, that whatever trains are bought, there will be a large upgrading of the existing Hitachi fleet, which will add batteries to a lot of trains.

In the July 2023 Edition of Modern Railways, there is an article, which is entitled LNER Embraces Pioneering Spirit, which takes the form of an interview with LNER’s Managing Director; David Horne.

In a section, which is entitled ‘225’ Replacement, this is said.

Meanwhile, Mr Horne is looking to what might replace the InterCity 225 fleet, now smartly repainted in a scheme which pays homage to the original ‘Swallow’ livery. While there were fears this fleet may be withdrawn as an economy measure, the ‘225s’ are now on lease until at least next summer.

But Mr Horne says obsolescence issues are a real challenge and LNER will struggle to maintain the fleet beyond 2025, and from the May 2023 timetable change the number of daily diagrams was reduced from five to four to conserve the fleet’s mileage. Much of the heavy maintenance work had previously been carried out at Wabtec’s Doncaster site, but this facility is no longer available, and while a recent reliability improvement programme is bearing fruit, the challenges remain. The crunch point comes with the transition to ETCS at the southern end of the ECML as part of the East Coast Digital Programme – Mr Horne says LNER does not want to fit cab signalling on the ‘225s’.

The solution to this  issue is to procure additional trains to run alongside the 65 Azumas, and LNER went out to tender in October 2020 for a fleet of 10 trains with self-power capability.

While a preferred bidder has been identified, the business case to proceed with the procurement is awaiting approval, but Mr Horne is still hopeful this project can be progressed.

The current plan envisages the new trains broadly replacing the ‘225s’ on Leeds and York diagrams, but a major benefit with the new fleet would be during engineering work – at present LNER has to withdraw services to places such as Harrogate and Hull to concentrate its bi-mode Azumas on services using non-electrified diversionary routes, and having more stock with self-power capability would ease the issue.

Currently, LNER has these Azumas and InterCity 225s in its fleet.

  • Five-car bi-mode Class 800 trains – 10
  • Nine-car bi-mode Class 800 trains – 13
  • Five-car electric Class 801 trains – 12
  • Nine-car electric Class 801 trains – 30
  • Nine-car electric ImterCity 225 trains – 8

Note.

  1. There are 23 bi-mode trains and 50 electric trains.
  2. There are 167 bi-mode carriages and 302 electric carriages.
  3. Currently 31.5 % of the trains are bi-mode.
  4. With ten new bi-mode trains and no InterCity 225 trains, 44 % of the fleet will be bi-mode.

Is this increase in the percentage of the fleet, that are bi-mode acceptable?

LNER’s Two Needs

Let’s look at LNER’s needs, which are actually two separate sub-needs.

  • There is a need for ten new trains to replace the InterCity 225 trains.
  • There is a need to increase the size of the bi-mode fleet to be able to use the Great Northern and Great Eastern Joint Line and other non-electrified routes to by-pass engineering works.

Note.

  1. I suspect that as Mr Horne explained, there are only five or possibly four InterCity 225s diagrammed on a particular day, then perhaps ten five-car bi-mode Class 800 trains, might be able to cover for the retirement of the InterCity 225s.
  2. These trains would work as pairs to Leeds and York to replace the InterCity 225 capacity.
  3. If required they could split and join at Leeds and York to serve other destinations.
  4. The diversion route of the Great Eastern Joint Line has an unelectrified distance of 93.7 miles and the route is electrified at both ends.
  5. Would a battery-electric Class 800 train handle this distance? I suspect if Stadler can do it, then Hitachi and Turntide Technology will be able to do it too!

LNER will have replaced the InterCity 225s and acquired ten new five-car blockade runners.

As an order for ten new five-car battery-electric trains, is not to be sneezed at, I suspect Hitachi will make sure that their new battery-electric variants have enough range.

So this would mean that the range of a five car battery-electric Class 800 train, should be in excess of 93.7 miles.

Advantages Of Converting Class 800 and Class 802 Trains To Battery-Electric Operation

It should be noted that the five-car and nine-car Class 800 and Class 802 trains have specific advantages when it comes to converting them to battery-electric operation.

  • They are modern trains, that are still in production, so every bit of information about the train is known down to the last nut, bolt and plastic clip.
  • Like most modern trains, hey have a sophisticated computer system controlling the train.
  • They have spaces for three, four or maybe even five diesel engines under the floor, which could be used for a battery-pack in every car designed to hold a diesel engine.
  • The train has an electric bus between nose and tail.
  • As is shown, when the trains change between diesel and electric, the pantograph can go up and down with all the alacrity of a whore’s drawers.
  • The trains can be converted between bi-mode and electric, by adding or removing diesel packs. I doubt this feature will be removed, as batteries replace diesels.

With my Electrical and Control Engineer’s hard hat on, I doubt there is anything to stop a Class 800 or Class 802 train being fitted with three or more batteries to create a 125 mph train, with a range approaching two hundred miles on battery power.

The initial name of these Hitachi trains was the Hitachi Super Express. Is this train the Hitachi Super Battery Express?

But it would appear, that for their initial needs, LNER, just need a range to handle the near hundred miles of the Great Northern and Great Eastern Joint Line.

Inverness and Aberdeen will come later.

Conclusion

The first version of the battery-electric train will have a range of around a hundred miles, so that they can handle the Great Northern and Great Eastern Joint Line diversion, which is 93.7 miles on battery power.

But fairly soon after introduction into service, I will be very surprised if they don’t claim the Guinness world record by running farther than the Stadler FLIRT Akku’s 139 miles.

No-one likes being second!

June 27, 2023 Posted by | Transport/Travel | , , , , , , , , , , , , , | 3 Comments

Thoughts About Electrification Through Devon And Cornwall

Distances

I’ll start by looking at a few distances.

  • Penzance and Taunton – 162.3 miles
  • Penzance and Exeter St. David’s – 131.5 miles
  • Penzance and Plymouth – 79.5 miles
  • Taunton and Exeter St. David’s – 30.7 miles
  • Plymouth and Exeter St. David’s – 52 miles
  • Taunton and Newbury – 89.6 miles
  • Plymouth and Taunton – 82.8 miles
  • Taunton and Paignton – 59 miles
  • Taunton and Patchway – 51.7 miles

Note.

  1. Patchway and Newbury are already electrified to Cardiff Central and London Paddington respectively.
  2. Bombardier’s engineer told me eight years ago, that the battery-electric Class 379 had a range of sixty miles.
  3. Stadler’s FLIRT Akku has a Guinness world record of 139 miles on one battery charge. See this page on the Stadler web site.
  4. Even Stadler’s Class 777 trains for Merseyrail have a range of 84 miles on battery power. See New Merseyrail Train Runs 135km On Battery.

The rail distances in Devon and Cornwall are getting closer to being within the capability of trains fitted with batteries.

Station Stop Times

These are typical times that trains stop in the more important stations between Taunton and Penzance.

  • Taunton – < 2 mins
  • Tiverton Parkway – < 2 mins
  • Exeter St. Davids – 2 mins
  • Newton Abbot – < 2 mins
  • Totnes – < 2 mins
  • Plymouth – 11 minutes
  • Devonport – < 2 mins
  • Saltash – < 2 mins
  • Menheniot – < 2 mins
  • Liskeard – < 3 mins
  • Bodmin Parkway – 2 mins
  • Lostwithiel – 2 mins
  • Par – 2 mins
  • St. Austell – 2 mins.
  • Truro – 2 mins
  • Redruth – 2 mins
  • Camborne – 2 mins

Note.

  1. The timings were for today.
  2. The Cardiff and Penzance services were being run by five-car Class 802 trains.
  3. Most station stops are around two minutes or less, but Plymouth on this train was eleven minutes.

I find it interesting that the Plymouth stop takes so much longer.

Train Stops At Plymouth

I looked at about twenty trains stopping at Plymouth, that included these services.

  • London Paddington and Penzance
  • Penzance and London Paddington
  • Cardiff Central and Penzance
  • Penzance and Cardiff Central

Note.

  1. I found an average time of eight minutes.
  2. Eleven minutes was a common stop.
  3. Eight minutes could be enough time for the rail equivalent of a Formula One splash and dash.
  4. CrossCountry services were going through the station in three minutes.

I am led to believe that the timetable used by the GWR trains would allow a quick battery charge at Plymouth station.

This OpenRailwayMap shows the platforms at Plymouth station.

Note.

  1. London is to the East and Penzance is to the West.
  2. Platform numbers increase from South to North.
  3. The two East-facing bay platforms are Platforms 1 and 2.
  4. The West-facing bay platform in the South-West corner is Platform 3.
  5. Platform 4 shares the island with the bay platforms 1, 2 and 3.
  6. Most trains going to Penzance use Platform 4.
  7. Platforms 5 and 6 share the centre island platform.
  8. Platforms 7 and 8 share the Northernmost island platform.
  9. Most trains going towards London use Platform 7.
  10. Wikipedia indicates that the track layout is comprehensive and allows a lot of operational flexibility.

Although the station was completed around forty years ago, it could have been designed for handling modern battery-electric trains.

  • There are three bay platforms numbered 1 to 3, to charge local services and send them on their way.
  • Trains can arrive and depart in the five through platforms, numbered 4 to 8, from either direction.
  • Two days ago, a nine-car London Paddington to Plymouth train terminated in Platform 7. After waiting an hour it returned to London. An hour would be enough time to fully-charge a train.
  • As many platforms as needed could be electrified.

I am fairly sure, that most battery-electric trains could be timetabled to leave Plymouth station with full batteries.

Turnround At Penzance

I have found these turnrounds.

  • 802113 arrived from Paddington at 1142 and left for London at 1215
  • 802022 arrived from Paddington at 1307 and left for London at 1415
  • 802103 arrived from Paddington at 1500 and left for London at 1615

This OpenRailwayMap shows the platforms at Penzance station.

Note.

  1. The three example trains used Platform 1.
  2. Platform 1 is the long platform on the landward side of the station.
  3. Platforms are numbered 1 to 4 from left to right.
  4. An appropriate number of platforms would be electrified to charge trains terminating at Penzance.

Trains would appear to have plenty enough time to recharge, so they would start their return journey with full batteries.

Engineering Ambition

Several times in my life, I’ve got fired up about engineering or software projects and I like to think, I’ve produced the best and fastest solution.

For this reason, I believe that Hyperdrive Innovation, who are now part of Turntide Technologies, and Hitachi will set themselves three objectives with the design of the the battery packs for the Class 802 train.

  • The battery-electric Class 802 will outperform the Stadler FLIRT Akku in terms of speed and distance.
  • The battery packs will be plug-compatible with the diesel engines, so there will only be minor software modification to the trains.
  • The train will be able to be handle all Great Western Railway’s routes without using diesel.
  • I wouldn’t be surprised that on many routes the train will cruise at over 110 mph on batteries.

I also suspect they want the Akku’s Guinness world record, which will mean the range will be in excess of 139 miles.

Battery Range Needed For Routes

These are routes that need to be covered by battery-electric Class 802 trains or similar.

  • Avanti West Coast – Crewe and Chester – 22.2 miles
  • Avanti West Coast – Crewe and Holyhead – 105.5 miles
  • Avanti West Coast – Crewe and Llandudno Junction – 65.5 miles
  • Avanti West Coast – Crewe and Wrexham – 34.4 miles
  • Avanti West Coast – Shrewsbury and Wolverhampton – 29.7 miles
  • Great Western Railway – Penzance and Plymouth – 79.5 miles
  • Great Western Railway – Plymouth and Taunton – 82.8 miles
  • Great Western Railway – Taunton and Patchway – 51.7 miles
  • Great Western Railway – Newbury and Taunton – 89.6 miles
  • Great Western Railway – Taunton and Paignton – 59.0 miles
  • Great Western Railway – Weston-super-Mare and Chippenham – 43.5 miles
  • Great Western Railway – Oxford and Great Malvern – 65.6 miles
  • Great Western Railway – Oxford and Hereford – 86.3 miles
  • Great Western Railway – Oxford and Worcester Foregate Street – 57.6 miles
  • Great Western Railway – Oxford and Worcester Shrub Hill – 57.2 miles
  • Great Western Railway – Cheltenham Spa and Swindon – 43.2 miles
  • Great Western Railway – Cardiff Central and Carmarthen – 77.4 miles
  • Great Western Railway – Cardiff Central and Pembroke Dock – 118.9 miles
  • Great Western Railway – Cardiff Central and Swansea – 45.7 miles
  • Hull Trains – Beverley and Temple Hirst Junction – 44.3 miles
  • Hull Trains – Hull and Temple Hirst Junction – 36.1 miles
  • LNER – Hull and Temple Hirst Junction – 36.1 miles
  • LNER – Middlesbrough and Longlands Junction – 22.2 miles
  • LNER – Sunderland and Longlands Junction – 48.5 miles
  • LNER – Lincoln Central and Newark Northgate – 16.6 miles
  • LNER – Leeds and Bradford – 13 miles
  • LNER – Leeds and Harrogate – 18 miles
  • LNER – Leeds and Huddersfield – 17 miles
  • LNER – Stirling and Inverness – 146 miles
  • LNER – Edinburgh Haymarket and Aberdeen – 130 miles
  • LNER – Peterborough and Doncaster via Great Northern and Great Eastern Joint Line – 93.7 miles
  • South Western Railway – Basingstoke and Exeter St. David’s – 124.5 miles
  • TransPennine – Hull and Micklefield – 42 miles
  • TransPennine – Longlands Junction and Saltburn – 34.7 miles
  • TransPennine – York and Scarborough – 42 miles
  • TransPennine – Doncaster and Cleethorpes – 52.1 miles
  • TransPennine – Stockport and Doncaster – 55.4 miles
  • TransPennine – Stockport and Cleethorpes – 107.5 miles

Note.

  1. Stirling and Inverness and Edinburgh Haymarket and Aberdeen could be shortened by up to thirty miles, by planned electrification in Scotland.
  2. I have assumed that the TransPennine Upgrade has been completed.
  3. It looks like a battery-electric Class 802 train could use the Great Northern and Great Eastern Joint Line diversion via Lincoln.
  4. I am slightly surprised, that the longest stretch of line without electrification and with a passenger service is Basingstoke and Exeter St. David’s.

Charging will be needed at some places to charge the battery-electric trains. Stations fitted with chargers could include Aberdeen, Carmarthen, Cleethorpes, Exeter St. David’s, Hereford, Holyhead, Hull, Inverness, Paignton, Penzance, Pembroke Dock, Plymouth, Swansea, Taunton, Weston-super-Mare, Worcester.

Most chargers would be a length of electrification in the platform, where the battery-electric trains terminated or passed through.

More On LNER’s Ten New Bi-Modes

I wrote about these trains in LNER Seeks 10 More Bi-Modes.

This was my conclusion.

There is a lot of scope to develop LNER’s services.

I think it is likely that the order will go to Hitachi.

But as I indicated, I do believe that there is scope for a manufacturer to design a zero-carbon train, that was able to serve Aberdeen and Inverness.

    • I suspect a fleet of ten trains would be sufficient.
    • Trains would use the 25 KVAC overhead electrification, where it exists and hydrogen or battery power North of the wires.

The trains would also be capable of being upgraded to higher speeds, should the East Coast Main Line be turned into a High Speed Line.

I also think, that whatever trains are bought, there will be a large upgrading of the existing Hitachi fleet, which will add batteries to a lot of trains.

In the July 2023 Edition of Modern Railways, there is an article, which is entitled LNER Embraces Pioneering Spirit, which takes the form of an interview with LNER’s Managing Director; David Horne.

In a section, which is entitled ‘225’ Replacement, this is said.

Meanwhile, Mr Horne is looking to what might replace the InterCity 225 fleet, now smartly repainted in a scheme which pays homage to the original ‘Swallow’ livery. While there were fears this fleet may be withdrawn as an economy measure, the ‘225s’ are now on lease until at least next summer.

But Mr Horne says obsolescence issues are a real challenge and LNER will struggle to maintain the fleet beyond 2025, and from the May 2023 timetable change the number of daily diagrams was reduced from five to four to conserve the fleet’s mileage. Much of the heavy maintenance work had previously been carried out at Wabtec’s Doncaster site, but this facility is no longer available, and while a recent reliability improvement programme is bearing fruit, the challenges remain. The crunch point comes with the transition to ETCS at the southern end of the ECML as part of the East Coast Digital Programme – Mr Horne says LNER does not want to fit cab signalling on the ‘225s’.

The solution to this  issue is to procure additional trains to run alongside the 65 Azumas, and LNER went out to tender in October 2020 for a fleet of 10 trains with self-power capability.

While a preferred bidder has been identified, the business case to proceed with the procurement is awaiting approval, but Mr Horne is still hopeful this project can be progressed.

The current plan envisages the new trains broadly replacing the ‘225s’ on Leeds and York diagrams, but a major benefit with the new fleet would be during engineering work – at present LNER has to withdraw services to places such as Harrogate and Hull to concentrate its bi-mode Azumas on services using non-electrified diversionary routes, and having more stock with self-power capability would ease the issue.

Currently, LNER has these Azumas and InterCity 225s in its fleet.

  • Five-car bi-mode Class 800 trains – 10
  • Nine-car bi-mode Class 800 trains – 13
  • Five-car electric Class 801 trains – 12
  • Nine-car electric Class 801 trains – 30
  • Nine-car electric ImterCity 225 trains – 8

Note.

  1. There are 23 bi-mode trains and 50 electric trains.
  2. There are 167 bi-mode carriages and 302 electric carriages.
  3. Currently 31.5 % of the trains are bi-mode.
  4. With ten new bi-mode trains and no InterCity 225 trains, 44 % of the fleet will be bi-mode.

Is this increase in the percentage of the fleet, that are bi-mode acceptable?

I wonder, if there is a more affordable and flexible way to increase the fleet size.

In the Wikipedia entry for the Class 800 train, there is a section, which is entitled Traction And Generator Units, where this is said.

The Class 800 and Class 802 bi-mode are equipped with three GU per five-car set and five GU per nine-car set; a five-car set has a GU situated under vehicles 2/3/4 and a nine-car set has a GU situated under vehicles 2/3/5/7/8. In comparison, the electric-orientated Class 801 features a single GU for a five to nine-car set, which provides emergency power for limited traction and auxiliaries if the power supply from the overhead line fails. By adding or removing GUs, a Class 800 can be converted into a Class 801 and vice versa.

Let’s look at LNER’s needs, which are actually two separate sub-needs.

  • There is a need for ten new trains to replace the InterCity 225 trains.
  • There is a need to increase the size of the bi-mode fleet to be able to use the Great Northern and Great Eastern Joint Line and other non-electrified routes to by-pass engineering works.

Note.

  1. I suspect that as Mr Horne explained, there are only five or possibly four InterCity 225s diagrammed on a particular day, then perhaps ten five-car bi-mode Class 800 trains, might be able to cover for the retirement of the InterCity 225s.
  2. These trains would work as pairs to Leeds and York to replace the InterCity 225 capacity.
  3. If required they could split and join at Leeds and York to serve other destinations.
  4. The diversion route of the Great Eastern Joint Line has an unelectrified distance of 93.7 miles and the route is electrified at both ends.
  5. Would a battery-electric Class 800 train handle this distance? I suspect if Stadler can do it, then Hitachi and Turntide Technology will be able to do it too!

LNER will have replaced the InterCity 225s and acquired ten new five-car blockade runners.

As an order for ten new five-car battery-electric trains, is not to be sneezed at, I suspect Hitachi will make sure that their new battery-electric variants have enough range.

So this would mean that the range of a five cat battery-electric Class 800 train, should be in excess of 93.7 miles.

It should be noted that the five-car Class 800 and Class 802 trains have specific advantages when it comes to converting them to battery-electric trains.

  • They are modern trains, that are still in production, every bit of information about the train is known down to the last nut, bolt and plastic clip.
  • Like most modern trains, hey have a sophisticated computer system controlling the train.
  • They have spaces for three, four or maybe even five diesel engines under the floor, which could be used for a battery-pack in every car designed to hold a diesel engine.
  • The train has an electric bus between nose and tail.
  • As is shown, when the trains change between diesel and electric, the pantograph can go up and down with all the alacrity of a whore’s drawers.
  • The trains can be converted between bi-mode and electric, by adding or removing diesel packs. I doubt this feature will be removed, as batteries replace diesels.

With my Electrical and Control Engineer’s hard hat on, I doubt there is anything to stop a Class 800 or Class 802 train being fitted with three or more batteries to create a 125 mph train, with a range approaching two hundred miles on battery power.

The initial name of these Hitachi trains was the Hitachi Super Express. Is this train the Hitachi Super Battery Express?

But it would appear, that for their initial needs, LNER, just need a range to handle the near hundred miles of the Great Northern and Great Eastern Joint Line.

Inverness and Aberdeen will come later.

Hull Trains

This page on the Lumo web site is entitled Greener Travel Between Edinburgh And London.

These are the first three paragraphs.

A new, 100% electric rail service is to start running between London and Edinburgh with fares for as little as £14.90 in a bid to encourage greener and more affordable travel between the capitals.

Called Lumo, it will provide low-carbon, affordable long-distance travel for over 1 million passengers per year. Over 74,500 passengers currently fly between Edinburgh and London each month3.

And with single tickets between the capitals starting from just £14.90, Lumo will be a comfortable, convenient alternative to flying that is affordable for all. Some 60% of all single fares will be available at a cost of £30 or less.

I’m sure Hull Trains, who are owned by First Group like Lumo would like to position themselves in the 100 % electric low-carbon box too!

Currently, Hull Trains’s five-car Class 802 trains, run 88.6 and 72.2 miles using diesel on round-trips to Beverley and Hull respectively from London.

If batteries were fitted to their trains to give a battery range of around a hundred miles, Hull Trains could call themselves 100 % electric.

No new infrastructure would be required, but a short length of overhead electrification in a convenient platform at Hull station would ensure the train left for London and Beverley with a full battery.

The pictures show Hull Trains’s Class 802 train in Platform 7 at Hull station.

Penzance And Taunton

This to me is the key section as if you can run a battery-electric train between these two stations it allows so many of the services to be run using zero-carbon traction.

These are distances from Taunton.

  • Exeter St. David’s – 30.7 miles
  • Newbury – 89.6 miles
  • Okehampton – 55.3 miles
  • Paignton – 59.0 miles
  • Patchway – 51.7 miles
  • Plymouth – 82.8 miles

Note.

  1. I’ve added Okehampton, as I feel that if Dawlish had another encounter with Poseidon, Okehampton with its proposed Parkway station on the A30 could be the terminus for coaches to and from Cornwall.
  2. All would be possible with a battery-electric train, with a hundred-mile range, leaving Taunton with a full battery.
  3. Charging could be needed at Okehampton and Paignton.

What is needed is some form of charging in the Taunton area.

This OpenRailwayMap shows Taunton station.

Note.

  1. The station has four through platforms.
  2. All Great Western Railway services to and from Devon and Cornwall stop in the station.
  3. I feel it would be possible to electrify the station, so that all stopping trains could charge the batteries.

But the problem would be, that as typically trains only stop for a couple of minutes at Taunton, there may not be enough time to take enough charge on board.

This OpenRailwayMap shows the track between Wellington and Collumpton, between Taunton and Exeter.

Note.

  1. The black line is the railway between Taunton and Exeter.
  2. The blue arrow in the North-East corner of the map indicates the position of the proposed Wellington station.
  3. Collumpton is in the South-West corner of the map and has also been put forward for a new Collumpton station.
  4. I talked about the reopening of these two stations in Reopening Of Wellington and Cullompton Stations.
  5. The M5 to the North of Collumpton runs closely alongside the railway.
  6. According to Real Time Trains, it takes just under ten minutes to go the thirteen miles between Wellington and Collumpton.

This Google Map shows a section of the M5 North of Collumpton.

And this Google Map shows Tiverton Parkway station.

Note how the railway runs alongside the M5 to the West.

I feel that if the two new stations of Wellington and Collumpton are built between Taunton and Exeter St. David’s, then why not partially electrify the route, so that all trains would leave or pass through Taunton and Collumpton stations with full batteries.

  • Going West the trains would reach Exeter St. David’s, Okehampton or Plymouth.
  • Going East trains would reach Newbury for Reading and Paddington, and Patchway for Cardiff.

I believe that a battery-electric solution is possible, that would enable the decarbonisation of the Great Western Main Line all the way to Penzance.

 

 

 

 

 

 

 

 

June 25, 2023 Posted by | Transport/Travel | , , , , , , , , , , , , , , , , , , , , , | 8 Comments

Should The Great Northern And Great Eastern Joint Line Be Electrified?

The Great Northern And Great Eastern Joint Line was created in the Nineteenth Century by the Great Northern Railway and the Great Eastern Railway.

  • The main purpose was to move freight like coal, agricultural products and manufactured goods between Yorkshire and Eastern England.
  • It originally ran between Doncaster and Huntington via Gainsborough, Lincoln, Sleaford, Spalding and March.
  • It had a full length of almost 123 miles.
  • There was a large marshalling yard at Whitemoor near March.

Over the years the line has been pruned a bit and now effectively runs between Doncaster and Peterborough.

  • Trains between Lincoln and March are now routed via Peterborough.
  • It carries upwards of twenty freight trains per day in both directions through Lincoln Central station.
  • Many of the freight trains are going to and from the East Coast ports.
  • The distance between Doncaster and Peterborough is 93.7 miles, as opposed to the 79.6 miles on the East Coast Main Line.
  • The line is not electrified, but it connects to the electrified East Coast Main Line at both ends.

There have been some important developments in recent years.

2015 Freight Upgrade

Wikipedia says this about the major 2015 freight upgrade.

In 2015 a £280 million upgrade of the Joint Line by Network Rail was substantially complete, enabling two freight trains per hour to be diverted from the congested East Coast Main Line; gauge enhancements to enable the passage of 9 ft 6 in (2.90 m) containers were included in the work.

The Sleaford avoiding line had been substantially downgraded since the 1980s and was reinstated to double track as part of the 2015 scheme. Resignalling and modernisation of level crossings was included.

This means that freight trains have an alternative route, that avoids the East Coast Main Line.

Doncaster iPort

Over the last few years the Doncaster iPort has been developed, which is an intermodal rail terminal.

  • It has a size of around 800 acres.
  • The site opened in early 2018.
  • There is a daily train to the Port of Southampton and two daily trains to both Teesport and Felixstowe.
  • The Felixstowe trains would appear to use the Joint Line.

I feel that as the site develops, the Doncaster iPort will generate more traffic on the Joint Line.

This Google Map shows the Doncaster iPort.

There would appear to be plenty of space for expansion.

The Werrington Dive Under

The Werrington Dive Under has been built at a cost of £ 200 million, to remove a bottleneck at the Southern end of the Joint Line, where it connects to the East Coast Main Line.

The Werrington Dive Under was built, so that it could be electrified in the future.

LNER To Lincolnshire

LNER appear to have made a success of a one train per two hours (tp2h) service between London King’s Cross and Lincoln station.

  • LNER have stated, that they want to serve Grimsby and Cleethorpes in the North of the county.
  • North Lincolnshire is becoming important in supporting the wind energy industry in the North Sea.
  • Lincoln is becoming an important university city.
  • Several towns in Lincolnshire probably need a service to Peterborough and London.
  • In 2019, the Port of Grimsby & Immingham was the largest port in the United Kingdom by tonnage.

I can see an expanded Lincolnshire service from LNER.

Full Digital Signalling Of The East Coast Main Line To The South Of Doncaster

This is happening now and it will have a collateral benefits for the Joint Line.

Most passenger and freight trains will also use the East Coast Main Line, if only for a few miles, which will mean they will need to be fitted for the digital signalling.

This could mean that extending full digital signalling to Lincolnshire will not be a challenging project.

Arguments For Electrification

These are possible arguments for electrification.

Electric Freight Trains To And From The North

It would be another stretch of line, that could accommodate electric freight trains.

An Electrified Diversion Route For East Coast Main Line Expresses

Currently, when there is engineering blockades between Doncaster and Peterborough on the East Coast Main Line, the Hitachi Class 800 and Class 802 trains of Hull Trains and LNER are able to divert using their diesel power.

But the electric trains of LNER and Lumo have to be cancelled.

An electrified diversion route would be welcomed by passengers and train companies.

It would also mean that any trains running from King’s Cross to electrified destinations would not to have any diesel engines.

An Electrified Spine Through Lincolnshire

If there was an electrified spine between Doncaster and Peterborough via Gainsborough, Lincoln, Sleaford and Spalding, these stations would be these distances from the spine.

  • Boston – 16.8 miles
  • Cleethorpes – 47.2 miles
  • Grimsby Town – 43.9 miles
  • Market Rasen – 14.8 miles
  • Skegness – 40.7 miles

Note.

  1. These distances are all possible with battery-electric trains.
  2. Charging would be on the electrified spine and at Skegness and Cleethorpes stations.

All of South Lincolnshire and services to Doncaster would use electric trains.

London Services

London services would be via Spalding and join the East Coast Main Line at Werrington.

  • Boston and Skegness would be served from Sleaford, where the train would reverse.
  • Market Rasen, Grimsby Town and Cleethorpes would be served from Lincoln, where the train would reverse.

This would enable Cleethorpes and Skegness to have at least four trains per day to and from London King’s Cross.

North Lincolnshire Services

There are two train services in North Lincolnshire.

Cleethorpes and Barton-on-Humber.

Cleethorpes and Manchester Airport via Grimsby Town, Scunthorpe, Doncaster, Sheffield and Manchester Piccadilly.

Note.

  1. Cleethorpes would need to have a charger or a few miles of electrification, to charge a train from London.
  2. Doncaster, which is fully electrified is 52.1 miles from Cleethorpes.
  3. Barton-on-Humber is 22.8 miles from Cleethorpes.

Battery-electric trains should be able to handle both services.

Arguments Against Electrification

The only possible arguments against electrification are the disruption that the installation might cause and the unsightly nature of overhead gantries.

Conclusion

The Great Northern and Great Eastern Joint Line should be electrified.

 

 

 

 

February 15, 2022 Posted by | Energy, Transport/Travel | , , , , , , , , , , , | 1 Comment

Rail Minister Officially Opens Werrington Tunnel

The title of this post, is the same as that of this article on Rail Technology Magazine.

This is the first two paragraphs.

Werrington Tunnel, an underground freight tunnel running beneath the East Coast Main Line near Peterborough, has been formally opened by Rail Minister Chris Heaton-Harris.

A key step in the £1.2bn East Coast upgrade, the opening of the tunnel allows for freight services to be ran underneath the main rail artery, significantly improving passenger service reliability on the East Coast Main Line.

I also think, that the tunnel will be used creatively by passenger and freight operators.

Electrification

There is a possibility that the Great Northern and Great Eastern Joint Line (GNGE) between Werrington and Doncaster via Lincoln could be electrified.

  • It would allow the many freight trains using the route to be hauled by electric locomotives.
  • It would create a by-pass for the East Coast Main Line during engineering works, that could be used as a diversion route by electric trains.
  • Werrington and Lincoln are just over fifty miles and might be handled by battery-electric trains, if the GNGE were to be partially electrified.

According to one report, the Werrington Tunnel has been readied for electrification, should that be decided.

An Improved Peterborough And Lincoln Service

In the past, I have travelled between London and Lincoln with a change at Peterborough. In one case, I just missed my connection, as it was a long crowded walk between the two platforms.

The Werrington Tunnel will enable trains to and from Lincoln to use platforms on the West side of Peterborough station.

Train times and platform allocations could be arranged to make connections at Peterborough easier.

A London And Lincoln Service Via Spalding And Sleaford

There are two possible routes between London King’s Cross and Lincoln

  • The current LNER service leaves the East Coast Main Line at Newark.
  • An alternative route  would leave the East Coast Main Line at Peterborough and be routed via the Werrington Tunnel, Spalding and Sleaford.

These notes apply to the alternative route.

  1. The Lincoln service wouldn’t call at Grantham and Newark.
  2. Some services could also call at other stations.
  3. The current hourly Peterborough and Lincoln service via Spalding is run by a Class 153 train , which stops four times and takes fourteen minutes longer than LNER’s service via Newark.
  4. An easy connection to and from Skegness could be arranged at Spalding,

LNER also plans to extend some Lincoln services to Grimsby Town and Cleethorpes. Timings will dictate which will be the better route.

The Werrington Tunnel would add a large degree of flexibility in routing services between London King’s Cross and Lincoln and Lincolnshire.

Splitting And Joining At Peterborough

If the Werrington Tunnel makes Lincoln timings via Spalding and Sleaford viable, I wonder if it would be possible for trains to split and join at Peterborough.

  • One train would go to Lincoln via the Werrington Tunnel, Spalding and Sleaford.
  • The other might go North to Bradford, Hull, Middlesbrough, Scarborough or York.

The Werrington Tunnel again adds flexibility.

A Round-The-Wash Service Between Doncaster And Ipswich/Norwich

In Is There A Case For A Round-The-Wash Service Between Doncaster And Ipswich/Norwich?, I suggested this service, which would be an hourly Doncaster and Cambridge service via Scunthorpe, Grimsby Town Cleethorpes, Lincoln, Sleaford, Spalding, Werrington Tunnel and Peterborough that would alternatively extend to Ipswich or Norwich.

The Werrington Tunnel again opens up possibilities.

Conclusion

I’m sure that the Werrington Tunnel and the technology that built it will be imitated elsewhere.

 

 

December 9, 2021 Posted by | Transport/Travel | , , , , , , , , | 1 Comment

Is There A Case For A Round-The-Wash Service Between Doncaster And Ipswich/Norwich?

I suggested this service in The Integrated Rail Plan For The North And Midlands And The East Coast Main Line.

Effectively, it would join East Midlands Railway’s Doncaster and Peterborough service with Greater Anglia’s Cambridge and Ipswich service.

  • The service could go via Scunthorpe, Grimsby Town, Cleethorpes, Grimsby Town, Market Rasen, Lincoln, Sleaford, Spalding, Peterborough, March, Ely, Cambridge North, Cambridge, Newmarket, Bury St. Edmunds and Stowmarket.
  • There would be reverses at Cleethorpes and Cambridge.
  • There may be extra stops in Lincolnshire and across Suffolk.
  • The service would not use the East Coast Main Line, but would use the new Werrington Dive-Under and the Great Northern and Great Eastern Joint Line to the East of the East Coast Main Line.
  • The frequency would be one train per two hours (1tp2h).
  • Ideal trains could be Class 755 trains, perhaps running on batteries or hydrogen.

It would be paired with a new Doncaster and Norwich service, that could partly replace East Midlands Railway’s Liverpool and Norwich service.

  • The service could go via Scunthorpe, Grimsby Town, Cleethorpes, Grimsby Town, Market Rasen, Lincoln, Sleaford, Spalding, Peterborough, March, Ely, Cambridge North, Cambridge, Cambridge North, Ely, Thetford, Attleborough and Wymondham.
  • There would be reverses at Cleethorpes and Cambridge.
  • There may be extra stops in Lincolnshire and across Norfolk.

As with the Ipswich train it would not use the East Coast Main Line and have a frequency of 1tp2h.

The Objectives Of The Service

I believe this service could have several objectives.

Remove Slower Trains From The East Coast Main Line Between Peterborough And Doncaster

There aren’t many except freight, but this plan could provide a better solution to the Liverpool and Norwich service.

Providing Better Connections To The Biggest Growth Point In The UK – Cambridge

Cambridge needs better connections, so that it can bring in the staff and workers, that the high-tech capital of the UK needs.

Better Connection Of East Anglia And Lincolnshire To Northern England And Scotland

In Peterborough and Doncaster the route has two main interchanges to bring about these connections.

Promoting Tourism

For a start the route has five cathedrals; Bury St. Edmunds, Ely, Lincoln, Norwich and Peterborough and the historic city of Cambridge.

But I do believe that there are numerous places, where tourists might stay on the route and use it to explore the East of the country.

A Few Questions

These are a few questions.

Would The Route Be Electrified?

I don’t believe it will be fully electrified for two reasons.

Freight locomotives will increasingly become hydrogen-powered and also be able to use electrification, where it exists.

Plans by the likes of Hitachi ABB Power Grids and Furrer and Frey are likely to enable discontinuous and battery-electric trains to be able to work the route.

This philosophy would avoid all the disruption and reconstruction of structures of electrification and probably be much more affordable.

Would York Or Leeds Make A Better Northern Terminal For The Route?

Both have possibilities.

  • York would need running on the East Coast Main Line.
  • Leeds would probably need trains capable of 125 mph running.

On the other hand both Leeds and York would have superb connectivity.

Conclusion

I feel this would be a very valuable new service and it could be created without building any new infrastructure other than perhaps some strategic stations.

November 25, 2021 Posted by | Transport/Travel | , , , , , , , , , , , , | 1 Comment

A Special Weekend Timetable Has Been Put In Place For Lincoln Christmas Market

The title of this post, is the same as that of this article on Rail Advent.

This is the first paragraph.

The timetable has been put in place for Lincoln Christmas Market with direct services from Leeds, Newcastle, Edinburgh, Aberdeen and Inverness.

It looks to be a clever piece of planning, whilst work is carried out on the East Coast Main Line between Doncaster and Peterborough.

  • Services will be diverted onto the Great Northern and Great Eastern Joint Line though Spalding, Sleaford and Lincoln.
  • Will the trains be using the new tracks at the Werrington dive-under.
  • Nine-car Class 800 bi-mode trains will be used.
  • On the Saturday, there will be two trains per hour (tph) in both directions.
  • Of these trains, five trains per day (tpd)  in both directions will stop at Lincoln Central station.

It does appear that LNER are making the best of a difficult situation.

Passengers going to Lincoln for the Christmas Market will not be disappointed.

Grand Central Trains

Grand Central Trains are also using the diversion route.

Hull Trains

Hull Trains are also using the diversion route.

On the Saturday, there will be five tpd in both directions.

These can be doubled up to ten-car trains if the demand is there.

Lumo Trains

Lumo trains don’t appear to be running.

Conclusion

Network Rail seem to have done a cunning piece of timetabling.

There’ll be trainspotters galore in the centre of Lincoln.

November 6, 2021 Posted by | Transport/Travel | , , , , , , , , | 2 Comments

Freight On The East West Main Line

This page on the East West Main Line Partnership web site, describes their ambitions towards freight.

This is said.

The freight and logistics sector is one of the largest contributors to carbon emissions. Greater use of rail for freight and logistics provides additional resilience for the business community, while also acting on the need to achieve net zero.

Whilst not part of East West Rail, removing the bottlenecks on the Felixstowe to Midlands
corridor remains an immediate strategic priority for three sub-national transport bodies (England’s Economic Heartland, Transport East and Midlands Connect wrote to the Chancellor in this regard in July 2020).

However, the design and operation of the East West Main Line should take into account and contribute to the delivery of the requirements of the national rail freight strategy. In due course Great British Railways will have a statutory duty to consider the needs of rail freight and to take those needs into account in planning the future of the rail network.

It is therefore important that the East West Main Line is designed and delivered with the capability of supporting rail freight services without the need for additional works. In this regard due consideration must be given to ensuring that the impact on local communities of rail freight movements is minimised.

I have my thoughts.

Cutting Carbon Emissions In The Freight Sector

The obvious way to do this, would be to electrify every line in the country and purchase a new fleet of electric freight locomotives.

But the problems with this are the expense, disruption and timescale, it would take to replace all the locomotives and put up electrification on every line that might possibly be used by freight trains and  locomotives.

A solution is needed now, not in ten years.

But there are already solutions being demonstrated or developed that will cut carbon emissions from locomotives.

  • Stadler bi-mode Class 88 locomotives are already hauling freight trains and cutting emissions by using electric power where possible. But there are only ten of these locomotives.
  • The thirty Stadler tri-mode Class 93 locomotives on order for Rail Operations Group could or well be a game-changer. It is already known, that they will be able to cruise at 100 mph using electrification, so they will be able to mix it with the expresses on the Great Eastern Main Line. I suspect that these locomotives have been designed to be able to haul freight trains out of the Port of Felixstowe, by juggling the power sources.
  • In Freightliner Secures Government Funding For Dual-Fuel Project, I describe how Clean Air Power are converting a Class 66 locomotive to run on both diesel and hydrogen. This could be a very fruitful route, especially, if the diesel-electric Class 66 locomotives could be fitted with a pantograph to use electrification where it exists.
  • I have been very impressed with the work Wabtec have done to convert a large American diesel-electric locomotive into a battery electric locomotive. I wrote about it in FLXdrive ‘Electrifies’ Pittsburgh. In Could Class 66 Locomotives Be Converted Into Battery-Electric Locomotives?, I concluded that it might be possible to convert Class 66 locomotives into battery-electric locomotives using Wabtec’s technology.
  • In Powered By HVO, I talk about DB Cargo’s use of HVO to cut carbon emissions.

I am also sure that there are probably other solutions to decarbonise freight locomotives under development.

I would hope that over the next few years the amount of diesel fuel used in the freight sector will decrease significantly.

Improved Freight Routes

Currently, freight trains to and from Felixstowe take one of these routes.

  1. Via London – Using the Great Eastern Main Line, North London Line or Gospel Oak and Barking Line, and the West Coast Main Line.
  2. Via Nuneaton – Going via Bury St. Edmunds, Ely, Peterborough and Leicester before joining the West Coast Main Line at Nuneaton.
  3. Via Peterborough – Going via Bury St. Edmunds, Ely and Peterborough before taking the East Coast Main Line or the Great Northern and Great Eastern Joint Line via Lincoln.

The first two routes routes have capacity problems, whereas the third route has been improved by the use of the Great Northern and Great Eastern Joint Line.

Problems on the first two routes include

  • The Great Eastern Main Line is only dual-track.
  • The Great Eastern Main Line and the routes through London are at full capacity.
  • The route via Nuneaton does not have much electrification.

The East West Main Line will open up a new route directly across the country for some services, that currently go via the London or Nuneaton routes.

  • Felixstowe and Birmingham
  • Felixstowe and Glasgow
  • Felixstowe and Liverpool
  • Felixstowe and Manchester

These services could use the East West Main Line to connect with the West Coast Main Line at Bletchley, if the track were to be modified.

In addition services between Felixstowe and South Wales and the West Country could use the East West Main Line to Oxford and then join the Great Western Main Line at Didcot.

The East West Main Line could reduce the number of freight trains on these routes.

  • Great Eastern Main Line
  • North London Line
  • Gospel Oak and Barking Line
  • Peterborough and Leicester Line

The first three lines are certainly at capacity.

The Newmarket Problem

In Roaming Around East Anglia – Coldhams Common, I talked about previous plans of the East West Rail Consortium, who were the predecessor of the East West Main Line Partnership for the rail line between Chippenham Junction and Cambridge through Newmarket.

In this document on their web site, this is said.

Note that doubling of Warren Hill Tunnel at Newmarket and
redoubling between Coldham Lane Junction and Chippenham Junction is included
in the infrastructure requirements. It is assumed that most freight would operate
via Newmarket, with a new north chord at Coldham Lane Junction, rather than
pursuing further doubling of the route via Soham.

I have a feeling that if this plan were to be pursued, the Racing Industry in Newmarket wouldn’t be too keen on all the freight trains passing through the town.

Knowing the town and the racing industry and horses, as I do, I suspect that there will need to be serious noise mitigation measures through the town.

One would probably be a noise limit on the trains passing through, which might be very difficult for long freight trains, even if hauled by a much quieter battery-electric or hydrogen-powered locomotive.

Were the East West Main Line Partnership thinking of Newmarket, when they wrote the last sentence of the web page for freight.

In this regard due consideration must be given to ensuring that the impact on local communities of rail freight movements is minimised.

Newmarket is a unique town with a strong character and you shouldn’t take the town on lightly.

Related Posts

Birth Of The East West Main Line

Freight On The East West Main Line

Route Map Of The East West Main Line

 

 

 

October 8, 2021 Posted by | Hydrogen, Sport, Transport/Travel | , , , , , , , , , , , , , , , , , , , , , , , | 2 Comments

Iron Ore Miner Orders Heavy-Haul Battery Locomotive

The title of this post, is the same as that of this article on Railway Gazette.

This is the first two paragraphs.

Mining company Roy Hill has ordered a Wabtec FLXdrive battery-electric heavy-haul freight locomotive. This will replace one the four ES44ACi diesel-electric locos used to haul its 2 700 m long iron ore trains, and is expected to reduce fuel costs and emissions by ‘double digit’ percentages while also cutting maintenance costs.

The locomotive is scheduled to be delivered in 2023. It will have a capacity of 7 MWh, an upgrade from the 2·4 MWh prototype which Wabtec and BNSF tested in revenue service in California earlier this year.

Note.

  1. It will have a 7 MWh battery.
  2. 2700 metres is 1.6 miles.

It looks to me, that the three diesel locomotives and one battery locomotive are arranged as a massive hybrid locomotive and I suspect that with sophisticated control systems, those double digit cuts in fuel costs and emissions would be possible.

A couple of years ago, I took this picture near Shenfield.

This double-headed train has a Class 90 electric locomotive and a Class 66 diesel locomotive at the front of a long freight train.

  • The Class 90 locomotive has an TDM system for multiple working.
  • The Class 66 locomotive has an AAR system for multiple working.

So does this mean that the two locomotives can’t work together, which if it does begs the question of what is happening.

  • Had the Class 66 locomotive failed and Class 90 was acting as a Thunderbird?
  • Was the Class 66 locomotive being moved from one depot to another for maintenance or repair?
  • Was it an experiment to see if the two locomotives could work together?

I sometimes think that I didn’t see this unusual formation, but then the camera doesn’t lie.

But could we learn from what Wabtec are doing for Roy Hill in Australia?

The Class 93 Locomotive

Rail Operations Group have already ordered thirty Class 93 tri-mode locomotives from Stadler, which have following power ratings.

  • Electric – 4000 kW
  • Diesel – 900 kW
  • Hybrid – 1300 kW

If this locomotive is capable of hauling the heaviest intermodal freight trains out of Felixstowe, Southampton and other ports and freight terminals, it could contribute to substantial  reductions in the diesel fuel used and emissions.

As an example, I will use a freight train between Felixstowe North Terminal and Trafford Park Euro Terminal.

  • It is a route of 280 miles.
  • I will ignore that it goes along the North London Line through North London and along the Castlefield Corridor through Manchester Piccadilly station.
  • There is fifteen miles without electrification at the  Felixstowe end.
  • There is under three miles without electrification at the  Manchester end.

On this service , it could be as much as 94 % of diesel and emissions are saved, if the Class 93 locomotive can haul a heavy freight train out of Felixstowe. A few miles of strategically-placed electrification at the Ipswich end would help, if required.

It must also be born in mind, that the Class 93 locomotive is a 110 mph locomotive on electric power and could probably do the following.

  • Run at 100 mph on the busy Great Eastern Main Line.
  • Run at faster speeds on the West Coast Main Line.
  • Fit in well with the 100 mph passenger trains, that run on both routes.

So not only does it save diesel and carbon emissions, but it will save time and make the freight train easier to timetable on a route with lots of 100 mph passenger trains.

The Class 93 locomotive looks like it could be a game-changer for long-distance intermodal freight, especially, if there were short sections of strategically-placed electrification, added to the electrified network.

Emissions could also be reduced further by using some for of sustainable fuel.

The picture shows a Class 66 locomotive, which is powered by Hydrotreated Vegetable Oil  or HVO.

I can see that all diesel-powered trains and locomotives will be powered by sustainable fuels by the end of this decade.

A Wabtec Battery-Electric Locomotive

Wabtec is building a battery-electric locomotive for Roy Hill in Australia.

This article on Railway Age talks about Wabtec’s FLXdrive battery locomotives and describes some features of the locomotive for Roy Hill in Australia.

It mentions pantographs and overhead wires to charge the batteries.

  • Wabtec’s prototype battery locomotive has a power output of 3.24 MW and a battery size of 2.4 MWh
  • The Roy Hill battery locomotive has a power output of 3.24 MW and a battery size of 7 MWh

I could envisage Wabtec designing a UK-sized battery-electric locomotive with these characteristics.

  • 2.5 MW power output, which is similar to a Class 66 locomotive.
  • A battery size of perhaps 1.8 MWh based on Wabtec’s  FLXdrive technology.
  • A pantograph to charge the batteries and also power the locomotive where electrification exists.
  • 75 mph operating speed.
  • Ability to work in tandem with a Class 66 locomotive.

All technology is under Wabtec’s control.

This locomotive could have a range of at least fifty miles on battery power.

I think this locomotive could handle these routes.

  • Peterborough and Doncaster via the Great Northern and Great Eastern Joint Line via Lincoln, with some form of charging at halfway.
  • Felixstowe and Nuneaton, with some extra electrification at some point between Peterborough and Leicester.
  • Oxford and Birmingham, with possibly some extra electrification in the middle.

One option for charging electrification, would surely be to electrify passing loops.

I think a battery-electric locomtive based on Wabtec’s  FLXdrive technology could be a very useful locomotive.

Could Wabtec’s Battery-Electric Locomotive Pair-Up With A Class 66 Locomotive?

Roy Hill will use their locomotive to form a consist of three diesel locomotives and one battery locomotive to obtain double-digit savings of fuel and emissions, when hauling iron-ore trains that are 1.6 miles long on a route of 214 miles.

We don’t have massive iron-ore trains like this, but we do move huge quantities of segregates and stone around the country in trains generally hauled by Class 66 locomotives.

So could a Class 66 or another suitable locomotive be paired-up with a battery-electric locomotive to make savings of fuel and emissions?

I would suggest that if it works in Australia, the technology will probably work in the UK.

The biggest problem for Wabtec is that the heavy end of the market may well be a good one for hydrogen-powered locomotives. But Wabtec are going down that route too!

Conclusion

I am convinced that the two decarbonisation routes I have outlined here are viable for the UK.

But I also feel that locomotive manufacturers will produce hydrogen-powered locomotives.

Other companies like Alstom, Siemens and Talgo will also offer innovative solutions.

 

 

 

 

 

September 16, 2021 Posted by | Transport/Travel | , , , , , , , , , , , , , , , , , | 5 Comments

Werrington Dive-Under – 8th September 2021

I had gone to Peterborough to take pictures of the Werrington Dive Under, from a train between Peterborough and Spalding.

I took these pictures going Peterborough and Spalding.

My train between Peterborough and Spalding stations took the following route.

  • The Class 158 train was a great improvement on the Class 153 train, I took in From Peterborough To Lincoln in 2015.
  • It started in Platform 1b at Peterborough station.
  • It then crossed over to the Down Fast line to go North.
  • Finally, it slowed to cross the Up Fast and Up Slow lines to go towards Spalding.
  • It is surely not an efficient and the safest way to run a railway.

Think about turning right on a busy dual carriageway, by going through a gap in the central reservation.

This diagram shows the new track layout of Werrington Junction.

Note.

  1. My train was going North on Line 5, so it had to use the two crossovers to get to the lines to Spalding.
  2. The Up Stamford (Line 4) can be seen in the pictures after the two lines have disappeared into the dive-under.

It’s a pity the first of my pictures aren’t better, but the sun was in the wrong direction.

I took these pictures going Spalding and Peterborough.

Note.

  1. The train used the Up Slow (line 7) to go between Werrington Junction and Peterborough station.
  2. The last two pictures show the Class 158 train in Platform 1b at Peterborough station.

At least this time, the train didn’t cross the Fast lines.

Will Passenger Trains Use The Werrington Dive-Under?

I’m very sure they will!

  • On the Western side of Peterborough station, there are four platforms 4 to 7 and an avoiding line for freight trains going North.
  • It appears that all of these lines can access the Down Stamford (Line 1) and Up Stamford (Line 4) to go to Werrington Junction.
  • At Werrington Junction, trains either take the route to Stamford or use the dive-under for Spalding.

It looks to me, that if the trains to and from Spalding terminated in one of the Western platforms, then they could use the Stamford Lines to access the dive-under and they wouldn’t cross the Fast Lines of the East Coast Main Line on the flat.

Greengauge 21’s Suggestion, That Thameslink Be Extended To Spalding

In the study by Greengauge 21, which is entitled Connecting East Lincolnshire, this is said.

As noted the Spalding-Peterborough line should be a strong candidate for electrification because of its freight potential, and if so it could also accommodate an extension of Thameslink services from London and the South East to Spalding where interchange would be made with a Spalding–Boston–Louth–Grimsby express bus using the A16.

This proposal may be possible, if instead of using the dive-under, the Thameslink trains were able to use the Up Slow (line 7) to go both ways between Werrington Junction and Peterborough station.

As in the near future, full digital signalling will apply through Peterborough, this shouldn’t be a problem.

Electrification Of The Werrington Dive-Under?

Consider.

  • There is a gap of around ninety miles in the freight route between the comprehensive electrification at Peterborough and Doncaster stations on the Great Northern and Great Eastern Joint Line (GNGE).
  • There are dozens of level crossings.
  • The route goes through the centre of Lincoln, where there are two level crossings.

There are two ways of decarbonising the route.

  • Full electrification
  • Using hydrogen-powered freight locomotives.

Both solutions have their proposers and opponents.

I favour hydrogen-electric hybrid locomotives, that can use electrification where it exists, as it reduces the infrastructure cost on overbridges and in freight depots.

  • Hydrogen-powered locomotives have a go-anywhere capability.
  • There are also a lot of routes in the UK, where freight trains currently run and it would take a long time to electrify all of them.
  • As rail freight companies would have to purchase a lot of new locomotives, I can see them opting for hydrogen-electric hybrid locomotives.

But there are others, who think the only way is full electrification.

London And Lincolnshire By Electric Train

Passenger trains are not a problem, as Alstom, CAF, Hitachi, Stadler and others have demonstrated battery ranges of over fifty miles.

LNER are currently serving Lincoln from London using Hitachi bi-mode Class 800 trains, which use diesel for the 16.5 miles between Newark and Lincoln.

Hitachi’s proposed Intercity Tri-Mode Battery Train, is described in this Hitachi infographic.

I believe it would be possible to handle London and Lincoln via Newark without using diesel.

It also looks like it will be possible to convert the LNER’s current Class 800 trains into Intercity Tri-Mode Battery Trains.

But I doubt their range would sufficient to go between London and Lincoln via Peterborough, Spalding and Sleaford, unless there were to be a charging system at Lincoln.

But surely though, the ideal train for Lincolnshire would be a train that ran between London and Cleethorpes via Peterborough, Spalding, Sleaford, Lincoln, Market Rasen and Grimsby Town.

  • Peterborough and Lincoln is 56.9 miles.
  • Lincoln and Cleethorpes is 47.2 miles.
  • The service could be timed for a convenient interchange with the other Lincolnshire train services.
  • The service could run perhaps a few times per day.

With charging systems at Lincoln and Cleethorpes, similar to the Hitachi ABB Power Grids system that I described in Solving The Electrification Conundrum, this service could be run by an Intercity Tri-Mode Battery Train.

Peterborough And Lincolnshire By Electric Train

If you could run between Peterborough and major places in Lincolnshire, as part of a London service, I also suspect that a well-designed Peterborough and Lincolnshire service could serve Lincolnshire almost equally well.

It might use Platform 5 to terminate at Peterborough.

  • This is paired with Platform 4, which is the platform generally used by LNER trains from London, so there would be a cross-platform interchange going North.
  • Going South, there would be a need to use the footbridge.

How many people would use an hourly cross-TransLincs service?

 

September 9, 2021 Posted by | Transport/Travel | , , , , , , , , , | 2 Comments