The Anonymous Widower

What Will Happen To The Class 379 Trains?

Greater Anglia’s fleet of thirty Class 379 trains are being replaced by by a brand new fleet of Class 745 Stadler FLIRT EMUs which will be fixed 12-car trains on Stansted Express services and Class 720 Bombardier Aventra EMUs on Cambridge services.

These trains have a high specification.

  • Four-car trainsets.
  • Ability to work as four, eight and twelve-car trains.
  • 2+2 seating in Standard Class.
  • 2+1 seating in First Class.
  • Plenty of luggage space.
  • Wi-fi and power sockets.
  • Full compliance with all Persons of Reduced Mobility rules.
  • 100 mph capability.
  • Regenerative braking.

I also suspect the following is true about the trains.

  • The ability to run on 750 VDC third rail electrification could be added reasonably easily.
  • Lithium-ion batteries to give a limited range, can be fitted.
  • The top speed could be upgraded to the 110 mph of the closely-related Class 387 trains.
  • The trains have end gangways and could be certified to run through the core route of Thameslink, like the Class 387 trains.

So they would appear to be a very useful train.

So what will happen to the trains?

This is my speculative list of possible uses.

Continued Use By Greater Anglia

In some ways it’s strange that these reasonable new trains are being replaced on Stansted and Cambridge services.

They are being replaced by Stadler Class 745 trains, which like the Class 379 trains are 100 mph trains.

In the next decade or so, the West Anglia Main Line is to be upgraded with extra tracks and services will be faster.

So are performance upgrades available for the Class 745 trains, which will deliver these improved services?

If Stadler are late with their delivery of the Class 745 trains, the  Class 379 trains will continue to be used on Stansted and Cambridge services.

This is discussed in this article in Rail Magazine, which is entitled Contingency Plans In Place For Greater Anglia’s Main Line Fleet.

But surely, this would only delay their cascade to other operators.

According to Wikipedia, all of the replacement Class 745 trains, are scheduled to enter service in 2019, which should mean that the Class 379 trains should be available for cascade to other operators, sometime in 2020.

St. Pancras to Corby

Under Future in the Wikipedia entry for Corby station, this is said.

It is planned that a half-hourly London St Pancras to Corby service will operate from December 2019 using new Class 387 trains, once the Midland Main Line has been electrified beyond Bedford as part of the Electric Spine project. Network Rail has also announced that it plans to re-double the currently singled Glendon Junction to Corby section as part of this scheme.

In the December 2017 Edition of Modern Railways there is an article, which is entitled Wires To Corby Now in 2020.

This is the first paragraph.

Carillion is to deliver electrification of the Midland Main Line to Corby, but electric services will not start until December 2020, a year later than previously envisaged.

The article also states the following.

  • A fourth track is to be installed between Bedford and Kettering.
  • Track and wires are to be updated so that new 125 mph bi-mode trains can run between St. Pancras and Derby, Nottingham and Sheffield.
  • Improvements to the current electrification South of Bedford.

Everything should be completed, so that the new bi-mode trains could enter service from 2022.

It should be noted that Wikipedia says this about the Future of the East Midlands Trains franchise.

The franchise is due to end in August 2019. The Invitation to Tender is due to be issued in April 2018, which will detail what improvements bidders for the franchise must make. The contract will then be awarded in April 2019.

This could give the following project schedule on the Midland Main Line.

  • April 2019 – Award of new East Midlands franchise.
  • August 2019 – New East Midlands franchise starts.
  • December 2020 – Electric services to Corby start.
  • December 2022 – Bi-mode services to Derby, Nottingham and Sheffield start.

These dates would fit well with the retirement of the Class 379 trains by Greater Anglia in 2020.

Current timings between Corby and London are 71 minutes with four stops. I don’t think it would be unreasonable to assume that the improved track and new trains would be designed so that the timings between Corby and London would be reduced to under an hour, with a round trip of two hours.

If this can be achieved, then just four trains of an appropriate length will be needed to meet the required two tph timetable.

  • Four-car services would need four trains.
  • Eight-car services would need eight trains.
  • Twelve-car services would need twelve trains.

It might not be possible to run eight and twelve car services due to platform length restrictions.

If the two hour round trip could be achieved by an existing Class 387 or an uprated Class 379 trains, then either of these trains would be a shoe-in for the route.

Otherwise we’ll be seeing something faster like a Class 801 train.

But if services are to start in 2020, there would be a problem to manufacture the trains in the available time, as the contract will only have been awarded in April 2019.

I think that St. Pancras to Corby is a possibility for Class 379 trains, which may need to be uprated to 110 mph. On the other hand, Class 387 trains wouldn’t need to be uprated.

West Midlands Trains, who have a similar need, have ordered 110 mph Aventras.

  • So perhaps the new East Midlands franchise will do the same.
  • This would be more likely, if Bombardier come up with the rumoured 125 mph bi-mode Aventra.
  • Or they could buy a mixture of Class 800 and 801 trains.

I don’t think the Class 379 trains will work St. Pancras to Corby.

Battery Services

A Class 379 train was used for the BEMU trial, where a battery was fitted to the train and it ran for a couple of months between Manningtree and Harwich, using overhead power one way and battery power to return.

Was this class of train chosen, as it was one of the easiest to fit with a battery? After all it was one of the later Electrostars.

This article on the Railway Gazette from July 2007 is entitled Hybrid Technology Enters The Real World. It describes the experimental conversion of a Class 43 power-car from a High Speed Train into a battery-assisted diesel-electric power-car.

A second article in the Railway Gazette from October 2010 is entitled First New Stansted Express Train Rolls Out. It describes the Class 379 train in detail. This is an extract.

Although part of the Electrostar family, the Class 379 incorporates a number of technical changes from the original design developed in the late 1990s, making use of technologies which would be used on the Aventra next-generation Electrostar which Bombardier is proposing for the major Thameslink fleet renewal contract.

The body structure has been revised to meet European crashworthiness requirements. The window spacing has changed, with the glass bolted rather than glued in place to enable faster repairs. The couplers are from Dellner, and the gangways from Hübner. Top speed is 160 km/h, and the 25 kV 50 Hz trains will use regenerative braking at all times.

The last statement about regenerative braking is the most interesting.

To my knowledge electric trains that use regenerative braking had never run on the West Anglia Main Line before and that to handle the return currents with 25 KVAC needs special and more expensive transformers. The obvious way to handle regenerative braking at all times without using the electrification is to put an appropriately sized battery on the train.

If Bombardier have done this on the Class 379 train, then it might be a lot easier to fit a large battery to power the train. This would explain why the trains were chosen for the trial rather than a train from a more numerous variant.

The result was a trial of  which few, if any,negative reports can be found.

The result was a trial of  which few, if any,negative reports can be found.

Class 379 Train Performance On Batteries

Little has been said about the performance of the train.

However, in this document on the Network Rail web site, which is entitled Kent Area Route Study, this is said.

In 2015, industry partners worked together to investigate
battery-electric traction and this culminated with a
practical demonstration of the Independently Powered
Electric Multiple Unit IPEMU concept on the Harwich
Branch line in Anglia Route. At the industry launch event,
the train manufacturers explained that battery
technology is being developed to enable trains to run
further, at line speeds, on battery power, indeed, some
tram lines use this technology in the city centres and many
London buses are completely electric powered.

The IPEMU project looked at the feasibility of battery power
on the Marshlink service and found that battery was
sufficient for the train to run from Brighton to Ashford
International and back but there was insufficient charge to
return to Ashford International on a second round trip. A
solution to this could be that the unit arrives from Ashford
International at Brighton and forms a service to Seaford and
back before returning to Ashford International with a
charged battery.

The IPEMU demonstration train was a Class 379, a similar
type to the Class 377 units currently operated by Southern, it
was found that the best use of the battery power was to
restrict the acceleration rate to that of a modern diesel
multiple unit, such as a Class 171 (the current unit type
operating the line) when in battery mode and normal
acceleration on electrified lines.

|Ashford to Brighton is 62 miles, so a round trip would be 124 miles.

The document doesn’t say anything about how many stops were made in the tests, but I’m sure that Bombardier, Greater Anglia and Network Rail have all the data to convert a Class 379 into a viable IPEMU or Independently Powered Electric Multiple Unit.

As to how long it takes to charge the battery, there is an interesting insight in this article from Rail Magazine, which is entitled Battery-Powered Electrostar Enters Traffic. This is said.

It is fitted with six battery rafts, and uses Lithium Ion Magnesium Phosphate battery technology. The IPEMU can hold a charge for 60 miles and requires two hours of charging for every hour running. The batteries charge from the overhead wires when the pantograph is raised, and from regenerative braking.

The two-one ratio between charging and running could be an interesting factor in choice of routes.

What About The Aventra?

I quoted from this article in the Railway Gazette from October 2010 earlier.  This is said.

Although part of the Electrostar family, the Class 379 incorporates a number of technical changes from the original design developed in the late 1990s, making use of technologies which would be used on the Aventra next-generation Electrostar.

So would it be a reasonable assumption to assume, that if batteries can be fitted to a Class 379 train, then they could also be fitted to an Aventra?

This article in Global Rail News from 2011, which is entitled Bombardier’s AVENTRA – A new era in train performance, gives some details of the Aventra’s electrical systems. This is said.

AVENTRA can run on both 25kV AC and 750V DC power – the high-efficiency transformers being another area where a heavier component was chosen because, in the long term, it’s cheaper to run. Pairs of cars will run off a common power bus with a converter on one car powering both. The other car can be fitted with power storage devices such as super-capacitors or Lithium-ion batteries if required.

This was published six years ago, so I suspect Bombardier have refined the concept.

But it does look that both battery variants of both Class 379 trains and Aventras are possible.

Routes For Battery Trains

What important lines could be run by either a Class 379 train or an Aventra with an appropriate battery capability?

I will refer to these trains as IPEMUs in the remainder of this post.

I feel that one condition should apply to all routes run by IPEMUs.

The 2:1 charging time to running time on battery ratio must be satisfied.

East Coastway And Marshlink Lines

As Network Rail are prepared to write the three paragraphs in the Kent Area Route Study, that I quoted earlier, then the East Coastway and Marshlink Lines, which connect Brighton and Ashford International stations, must be high on the list to be run by IPEMUs.

Consider.

  • All the route, except for about twenty-four miles of the Marshlink Line is electrified.
  • Brighton and Ashford International stations are electrified.
  • Some sections have an operating speed of up to 90 mph.
  • Brighton to Hastings takes 66 minutes
  • Ashford International to Hastings takes 40 minutes
  • There is a roughly fifteen minute turnround at the two end stations.

The last three points, when added together, show that in each round trip, the train has access to third-rail power for 162 minutes and runs on batteries for 80 minutes.

Does that mean the 2:1 charging to running ratio is satisfied?

I would also feel that if third-rail were to be installed at Rye station, then in perhaps a two minute stop, some extra charge could be taken on board. The third-rail would only need to be switched on, when a train was connected.

It looks to me, that even the 2015 test train could have run this route, with just shoe gear to use the third-rail electrification. Perhaps it did do a few test runs! Or at least simulated ones!

After all, with a pantograph ready to be raised to rescue a train with a flat battery, they could have run it up and down the test route of the Mayflower Line  at a quiet time and see how far the train went with a full battery!

Currently, many of the train services along the South Coast are run by a fleet of Class 313 trains, with the following characteristics.

  • There are a total of nineteen trains.
  • They were built in the late 1970s.
  • They are only three cars, which is inadequate at times.
  • They are 75 mph trains.
  • They don’t have toilets.
  • The trains are used on both the East Coastway and West Coastway Lines.

Replacing the trains with an appropriate number of Class 379 trains or Aventras would most certainly be welcomed by passengers, staff and the train companies.

  • Diesel passenger trains could be removed from the route.
  • There could be direct services between Ashford International and Southampton via Brighton.
  • One type of train would be providing most services along the South Coast.
  • There would be a 33% increase in train capacity.
  • Services would be a few minutes quicker.
  • For Brighton’s home matches, it might be possible to provide eight-car trains.
  • The forty-year-old Class 313 trains would be scrapped.

The service could even be extended on the fully-electrified line to Bournemouth to create a South Coast Seaside Special.

London Bridge To Uckfield

I looked at Chris Gibb’s recommendation for this line in Will Innovative Electrification Be Used On The Uckfield Line?

These actions were recommended.

  • Electrification of the branch using 25 KVAC overhead.
  • Electrification of tunnels with overhead conductor rail.
  • Dual-voltage trains.
  • Stabling sidings at Crowborough.

How would this be affected if IPEMUs were to be used?

The simplest way to run IPEMUs would be to install third-rail at Uckfield to charge the train.

Current timings on the route are as follows.

  • London Bridge to Hurst Green – electrified – 32 minutes
  • Hurst Green to Uckfield – non-electrified – 41 minutes
  • Turnaround at London Bridge – 16 minutes
  • Turnaround at Uckfield – 11 minutes

Hurst Green station is the limit of the current electrification.

Adding these times together, show that in each round trip, the train has access to third-rail power for 91 minutes and needs to on batteries for 82 minutes.

It looks like the 2:1 charging to running ratio is not met.

To meet that, as the round trip is three hours, that means that there probably needs to be two hours on electrification and an hour on batteries.

So this means that at least eleven minutes of the journey between Hurst Green and Uckfield station needs to be electrified, to obtain the 2:1 ratio.

It takes about this time to go between Crowborough and Uckfield stations.

  • Crowborough will have the new sidings, which will have to be electrified.
  • The spare land for the sidings would appear to be to the South of Crowborough station in an area of builders yards and industrial premises.
  • Crowborough Tunnel is on the route and is nearly a kilometre long.
  • The route is double-track from Crowborough station through Crowborough Tunnel and perhaps for another kilometre to a viaduct over a valley.
  • The viaduct and the remainder of the line to Uckfield is single track.
  • The single track section appears to have space to put the gantries for overhead electrification on the bed of the original second track.

If you apply Chris Gibb’s original recommendation of 25 KVAC, then electrification between Crowborough and Uckfield station, might just be enough to allow IPEMUs to work the line.

  • The sidings at Crowborough would be electrified.
  • About half of the electrification will be single-track.
  • Crowborough Tunnel would use overhead rails.
  • Power could probably be fed from Crowborough.
  • The regenerative braking would be handled by the batteries on the trains.
  • Changeover between overhead power and batteries would be in Crowborough station.
  • Buxted and Uckfield stations wouldn’t be complicated to electrify, as they are single-platform stations.

I very much feel that running IPEMUs between London Bridge and Uckfield is possible.

Preston to Windermere

The Windermere Branch Line is not electrified and Northern are proposing to use Class 769 bi-mode trains on services to Windermere station.

Current timings on the line are as follows.

  • Windermere to Oxenholme Lake District – non-electrified – 20 minutes
  • Oxenholme Lake District to Preston – electrified – 40 minutes

If you add in perhaps ten minutes charging during a turnaround at Preston, the timings are just within the 2:1 charging ratio.

So services from Windermere to at least Preston would appear to be possible using an IPEMU.

These trains might be ideal for the Windermere to Manchester Airport service. However, the Class 379 trains are only 100 mph units, which might be too slow for the West Coast Main Line.

The IPEMU’s green credentials would be welcome in the Lakes!

The Harrogate Line

This is said under Services in the Wikipedia entry for Harrogate station, which is served by the Harrogate Line from Leeds.

The Monday to Saturday daytime service is generally a half-hourly to Leeds (southbound) calling at all stations and to Knaresborough (eastbound) on the Harrogate Line with an hourly service onwards to York also calling at all stations en route.

Services double in frequency at peak time to Leeds, resulting in 4 trains per hour (tph) with 1tph running fast to Horsforth. There are 4 tph in the opposite direction between 16:29 and 18:00 from Leeds with one running fast from Horsforth to Harrogate.

Evenings and Sundays an hourly service operates from Leeds through Harrogate towards Knaresborough and York (some early morning trains to Leeds start from here and terminate here from Leeds in the late evening).

Proposals have been made to create a station between Harrogate and Starbeck at Bilton, whilst the new Northern franchise operator Arriva Rail North plans to improve service frequencies towards Leeds to 4 tph from 7am to 7pm once the new franchise agreement starts in April 2016.

I believe that the easiest way to achieve this level of service would be to electrify between Leeds and Harrogate.

  • IPEMUs might be able to go between Harrogate and York on battery power.
  • Leeds and York are both fully electrified stations.
  • If a link was built to Leeds-Bradford Airport, it could be worked on battery power and the link could be built without electrification.
  • The electrification could be fed with power from Leeds.
  • There is also the two-mile long Bramhope Tunnel.

Full electrification between Leeds and Harrogate would allow Virgin’s Class 801 trains to reach Harrogate.

I’m fairly certain that there’s a scheme in there that with minimal electrification would enable IPEMUsy to reach both a new station at Leeds-Bradford Airport and York.

Conclusion

These routes show that it is possible to use IPEMUs to run services on partially-electrified routes.

As I said earlier, the 2:1 ratio of charging to running time could be important.

Airport Services

Class 379 trains were built to provide fast, comfortable and suitable services between London Liverpool Street and Stansted Airport.

Because of this, the Class 379 trains have a First Class section and lots of space for large bags.

Surely, these trains could be found a use to provide high-class services to an Airport or a station on a high-speed International line.

But there are only a limited number of UK airports served by an electrified railway.

Most of these airports already have well-developed networks of airport services, but Class 379 trains could provide an upgrade in standard.

In addition, the following airports, may be served by an electrified heavy rail railway.

All except Doncaster Sheffield would need new electrification. For that airport, a proposal to divert the East Coast Main Line exists.

Possibilities for airport services using IPEMUs, based on Class 379 trains with a battery capability would include.

Ashford International

The completion of the Ashford Spurs project at Ashford International station will surely create more travellers between Southampton, Portsmouth and Brighton to Ashford, as not every Continental traveller will prefer to go via London.

Class 379 IPEMUs,with a battery capability to handle the Marshlink Line would be ideal for a service along the South Coast, possibly going as far West as Bournemouth.

Birmingham

Birmingham Airport is well connected by rail.

I think that as train companies serving the Airport, have new trains on order, I doubt we’ll see many Class 379 trains serving the Airport.

Bristol

Various routes have been proposed for the Bristol Airport Rail Link.

In my view, the routes, which are short could be served by light rail, tram-train or heavy rail.

As the proposed city terminus at Bristol Temple Meads station would be electrified and the route is not a long one, I’m pretty sure that a Class 379 IPEMU could work the route.

But light rail or tram-train may be a better option.

Gatwick

Gatwick Airport station is well served by trains on the Brighton Main Line, running to and from Brighton, Clapham Junction, East Croydon, London Bridge, St. Pancras and Victoria, to name just a few.

Gatwick also has an hourly service to Reading via the North Downs Line, which is only partly electrified.

In my view, the North Downs route would be a classic one for running using Class 379 IPEMUs.

  • The Class 379 trains were built for an Airport service.
  • Four cars would be an adequate capacity.
  • No infrastructure work would be needed. But operating speed increases would probably be welcomed.
  • Third-rail shoes could be easily added.
  • Several sections of the route are electrified.
  • Gatwick Airport and Reading stations are electrified.

Currently, trains take just over an hour between Reading and Gatwick Airport.

Would the faster Class 379 IPEMUs bring the round trip comfortably under two hours?

If this were possible, it would mean two trains would be needed for the hourly service and four trains for a half-hourly service.

There may be other possibilities for the use of Class 379 trains to and from Gatwick Airport.

  • Luton Airport keep agitating for a better service. So would a direct link to Gatwick using Class 379 trains be worthwhile?
  • Class 379 IPEMUs  could provide a Gatwick to Heathrow service using Thameslink and the Dudding Hill Line.
  • Class 379 IPEMUs could provide a Gatwick to Ashford International service for connection to Eurostar.

I also feel that, as the trains are closely-related to the Class 387/2 trains used on Gatwick Express, using the Class 379 trains on Gatwick services would be a good operational move.

Also, if Class 379 IPEMUs were to be used to create a South Coast Express, as I indicated earlier, two sub-fleets would be close together.

Leeds-Bradford

Earlier I said that the Harrogate Line could be a route for IPEMUs, where services could run to York, if the Leeds to Harrogate section was electrified.

A spur without electrification could be built to Leeds-Bradford Airport.

Based on current timings, I estimate that a Bradford Interchange to Leeds-Bradford Airport service via Leeds station would enable a two-hour round trip.

An hourly service would need two trains, with a half-hourly service needing four trains.

Manchester

Manchester Airport is well connected by rail and although the Class 379 trains would be a quality upgrade on the current trains, I think that as Northern and TransPennine have new trains on order, I doubt we’ll see many Class 379 trains serving the Airport.

Conclusion

Looking at these notes, it seems to me that the trains will find a use.

Some things stand out.

  • As the trains are only capable of 100 mph, they may not be suitable for doing longer distances on electrified main lines, unless they are uprated to the 110 mph operating speed of the Class 387 trains.
  • The main line where they would be most useful would probably be the East and West Coastway Lines along the South Coast.
  • Converting some into IPEMUs would probably be useful along the Marshlink and Uckfield Lines, in providing services to Gatwick and in a few other places.

I also feel, that Aventras and other trains could probably be designed specifically for a lot of the routes, where Class 379 trains, with or without batteries, could be used.

 

 

 

 

 

 

 

December 6, 2017 Posted by | Travel | , , , , , , , | Leave a comment

Trains Along The South Coast

I had lunch today with an old friend who lives near Bosham station in West Sussex.

They indicated that the train service along the South Coast to Brighton wasn’t the best.

So I thought, I’d have a bit of an explore on Wikipedia.

The route between Ashford International and Weymouth stations can be divided into four sections.

Weymouth To Southampton – The South Western Main Line

The South Western Main Line runs between Weymouth and Southampton Central stations.

  • There are twenty stations.
  • The operating speed is 100 mph.
  • The line is fully electrified.
  • The line is double-track, except for between Dorchester South and Moreton stations.
  • There would only appear to be one level crossing at Brockenhurst station.

it is a high quality electrified line, where a well-driven train can keep up a good time.

The fastest trains take an hour and twenty minutes between Weymouth and Southampton with nine stops.

Southampton To Brighton – The West Coastway Line

The West Coastway Line runs between Southampton Central and Brighton stations.

Following the line on Google Maps, the line could probably have an increased speed limit, but the problem is obvious in the number of level crossings.

Timings on the line are as follows.

  • Southampton Central to Brighton takes one hour forty-five minutes.
  • Portsmouth to Brighton takes one hour twenty minutes.
  • Portsmouth to Southampton takes forty minutes.

These times are for faster journeys without changes.

Brighton To Hastings – The East Coastway Line

The East Coastway Line runs between Brighton and Hastings stations

Fastest journeys between Brighton and Hastings take an hour.

Hastings To Ashford International – The Marshlink Line

The Marshlink Line runs between Hastings and Ashford International stations.

  • There are nine stations.
  • The operating speed is 60 mph.
  • The line is double-track with sections of single-track.
  • The line is not electrified.
  • There are several level crossings.

Fastest journeys between Ashford Internsational and Hastings take forty minutes.

The May 2017 Edition of Modern Railways has an article entitled Kent Capacity Constraints Highlighted.

One sub-section is entitled High Speed To Hastings and it lists options as to how high-speed services could be run to Hastings via Ashford International station and the Marshlink Line.

  1. Electrify Ashford To Hastings At 25 KVAC
  2. Electrify Ashford To Hastings At 750 VDC
  3. Use Class 802 Electro-Diesel Trains
  4. Use Class 395 Or Class 801 Trains With Batteries

I examined the options in full detail in Options For High Speed To Hastings.

Class 313 Trains

When I travel to the area I inevitably find that I’m travelling in a Class 313 train.

  • The trains entered service in 1976.
  • The trains are the oldest electric multiple units in service on the British mainland.
  • The trains are only three cars.
  • The trains have no toilets.
  • The trains have a maximum speed of 75 mph.

Their biggest problem, is that because the trains have such a poor performance, all routes on which they are likely to run have to be geared to a train running at 75 mph, that is not the quickest at executing a stop at a station.

It should be remembered that the time a train takes to stop at a station, unload and load passengers and then restart and accelerate to linespeed, is a major factor in determining the schedule on a route with a lot of stations.

Train manufacturers and operators have been doing a lot of work to reduce this time and a modern train could be almost a minute or even more quicker than a Class 313 train, at each stop.

Wikipedia says this about the introduction of the Class 313 trains, which replaced more modern and faster Class 377 trains.

The 313s commenced operations with Southern on 23 May 2010, providing a two-trains-per-hour service between Brighton and Seaford, and some trains between Brighton and Lewes, Hove, West Worthing and Littlehampton.[12] From 13 December 2010, their operation expanded to stopping services from Brighton to Portsmouth Harbour and the Littlehampton to Bognor Regis shuttle.

The decision to use 313s on the Coastway lines has been controversial, as they are much older than the 377s and have fewer on-board passenger facilities.

The rail union RMT criticised the move and many publications including the BBC have questioned the introduction of 35-year-old trains with no lavatories in place of much newer units. These trains are deployed on services that operate predominantly over short distances, such as Brighton to Hove and Brighton to Seaford, and some longer (but stopping) services that provide predominantly local links that run alongside 377s on faster services.

The introduction of 313s on the Coastway routes facilitated the delivery of additional capacity on high-demand suburban routes in South London, where 10-car trains services are to be introduced combined with platform lengthening.

This report on the BBC gives more details.

The Major Problems Along The South Coast

Summarising the previous sections, the major problems on the route can be summarised.

  • The Class 313 trains with their poor performance are not fit for purpose.
  • The numerous level crossings significantly reduce the operating speed of the route.
  • The lack of electrification on the Marshlink Line is a serious obstacle to better London-Hsstings services via HS1.

I would also question, if there is sufficient capacity along the line, especially as there are now three Premier League clubs along its route.

In the following section, I shall detail what is proposed and a few extra actions, that I feel should be taken.

Improve The Marshlink Line

The May 2017 Edition of Modern Railways has an article entitled Kent Capacity Constraints Highlighted.

One sub-section is entitled High Speed To Hastings and it lists options as to how Southeastern  High-Speed services could be run to Hastings via Ashford International station and the Marshlink Line.

  1. Electrify Ashford To Hastings At 25 KVAC
  2. Electrify Ashford To Hastings At 750 VDC
  3. Use Class 802 electro-diesel trains
  4. Use Class 395 Or Class 801 trains With Batteries.

As to which option is chosen, Modern Railways says this.

The option to use a ‘hybrid’ electric/self-powered (diesel or battery) train is suggested as being a ‘more cost-effective way forward’, with linespeed improvements then delivered in an incremental way.

I examined the options in full detail in Options For High Speed To Hastings.

If the improvement was comprehensive, it would give the following advantages.

  • High-Speed services from St. Pancras to Hastings.
  • Journeys from Ashford International to Portsmouth, Southampton, Bournemouth and Weymouth would be all electric and if desired could be without a change of train.
  • Better connectivity along the South Coast to Continental services at Ashford International station.
  • A secondary route from London to Brighton in case of closure of the Brighton Main Line.

If an off-the-shelf solution like Class 802 trains were to be used, the improvements could be delivered in a timely manner.

Remove As Many Level Crossings As Possible

Removal of level crossings is a sensitive issue, but from Southampton to Ashford International, they are a serious limit on the operating speed of the trains.

But it is not just the trains that suffer, but road traffic as well.

Consider Hampden Park station, where Wikipedia says this about the level crossing.

The level crossing at Hampden Park is thought to be one of the busiest in the country, with an average fourteen train movements an hour off-peak, and this can lead to significant traffic congestion on adjacent roads.

As some services actually cross it twice to call at Eastbourne station, this level crossing certainly needs to be eliminated.

Improved Stations

Several of the stations have been upgraded, but I believe that step-free access and longer platforms are needed at quite a few stations.

Brighton and Hove Albion are now one of three Premier League football teams along the South Coast and Falmer station needs to be improved, so that higher-capacity trains can serve the ground on match days.

The Plans Of South Western Railway

The May 2017 Edition of Modern Railways also gives details of the plans of the new South Western Railway franchise from December 2018.

This is said.

A direct service will link Portsmouth, Southampton and Weymouth, while there will be a second hourly semi-fast service between Portsmouth and Southampton offering a total of 29 additional services between the cities on Mondays to Saturdays.

Wikipedia also says that there will be another thirty five Monday to Saturday services between London and Portsmouth, with more on Sundays.

Services Between London And Portsmouth

Currently, on a typical day there are sixty-nine down services and seventy-one up services. So as thirty-five extra services are going to be provided, then that means there will be a twenty-five percent increase in services between London and Portsmouth.

So would this mean that London to Portsmouth has a frequency of five trains per hour (tph), as against three tph for Southampton?

As South Western Railway will be introducing additional Portsmouth to Weymouth services, will this mean that there will be two fast routes to London from Weymouth?

  • A direct train.
  • One with a change at Havant on to Portsmouth Direct Line services.

South Western Railway have certainly thought long and hard.

The Class 313 Trains Will Go To The Scrapyard

With all the fast 100 mph trains rushing between Ashford International and Brighton and Portsmouth and Weymouth, the Class 313 trains will be worse than inadequate and the best place for them will be the scrapyard.

I just wonder though if South Western Railway’s unwanted but new Class 707 trains could replace the Class 313 trains along parts of the South Coast.

  • They are 100 mph trains, probably with a good stopping performance, which could save a minute at every stop.
  • They are five-car units.
  • They have toilets.

As an illustration of the difference the new trains could make, the current Portsmouth to Brighton service takes around one hour twenty minutes with twenty stops.

A rough estimate indicates that Portsmouth to Brighton could be under an hour with new 100 mph trains.

The only problems would be that they couldn’t work a Marshlink Line without electrification and services along the South Coast are provided by three different companies.

Conclusion

A lot of improvement is possible in services along the South Coast.

Adjusting current timings for new trains with a better stopping performance could give the following sectional timings.

  • Ashford International to Hastings – 35 minutes
  • Hastings to Brighton – 60 minutes
  • Brighton to Portsmouth – 60 minutes
  • Portsmouth to Southampton – 35 minutes

I believe that an Ashford International to Southampton time of three hours is possible.

This is a similar time as going via London and using HS1.

 

May 23, 2017 Posted by | Travel | , , , , , , , | 7 Comments

The Class 319 Flex Train And Third Rail Routes

In writing The Electrical System Of A Class 319 Flex, I came to the conclusion, that the designers of the Class 319 Flex had taken great care that the train would perform to a high standard on lines with third-rail electrification..

There are three routes that could be given an improved service using a third-rail bi-mode train.

Ashford to Brighton on the Marshlink Line.

Oxted to Uckfield on the Oxted Line.

Reading to Tonbridge via Gatwick Airport on the North Downs Line.

Note.

  1. From Ashford, trains on the Marshlink Line could go to London, but probably not on High Speed 1.
  2. The East Coastway Line between Hastings and Brighton can accept eight-car trains, and is a 90 mph line, that has recently been resignalled.
  3. From Oxted on the Oxted Line trains could go to London.
  4. The Uckfield Branch has been updated to accept twelve-car trains.
  5. Tonbridge to Gatwick Airport was electrified as a Eurostar diversion route.

For operational reasons on the Uckfield Branch and along the South Coast, it would probably be a good idea, if the ability to run as eight- and twelve car formations was developed for the Class 319 Flex.

The South Coast Express

The East Coastway Line could be connected to the West Coastway Line to Southampton Central station with a reverse at Brighton.

At present because the Marshlink Line is not electrified and the two Coastway Lines are run independently, you can’t travel between stations on the West Coastway Line to any station on the East Coastway Line without changing trains at Brighton.

Consider creating a South Coast Express between Ashford and Southampton using bi-mode trains.

  • The Class 800 train, which is the only current bi-mode train, comes as a five-car train, but doesn’t have a dual voltage version, although its cousin the Class 395 train can work on third rail networks.
  • The Class 319 Flex train could do the whole route and would only need to use diesel power for twenty-six miles.
  • The speed limit along the two Coastway Lines could probably be upgraded to 100 mph.
  • A new Eastbourne Parkway station could be created on a reopened direct line between Polegate and Pevensey & Westham stations, to avoid all trains reversing at the current Eastbourne station and hence save time.
  • It would be a feeder railway to Thameslink services at Brighton and Eurostar services at Ashford.
  • Eight-car or even twelve-car formations could work through Falmer station on match days at The Amex.
  • Southampton have plans to develop the railway to serve St. Mary’s Stadium and the Waterfront, which could be part of an upgraded West Coastway Line.

Currently, with a change at Brighton, Southampton to Ashford takes three hours forty-seven minutes. With a 100 mph train on an updated 100 mph line, the service could surely be a lot faster.

If an hourly service was required, then you get this table of trains required to run the service against  the journey time between Ashford and Southampton.

  • Three hours needs six trains.
  • Two and a half hours needs five trains.
  • Two hours needs four trains.

Southern use more trains than that now to provide a slower service, with a change at Brighton.

West Of Basingstoke

The West of England Main Line is only electrified as far as Basingstoke station, which is just under fifty miles from London.

Distances from Basingtoke are approximately.

Could a Class 319 Flex carry enough fuel to serve this route?

I have seen an early copy of the brochure for a Class 319 Flex and Porterbook say that the train is designed to handle ten round trips from Hazel Grove to Buxton, which is a seventeen mile trip, where the steep gradients up are probably balanced by the coming down.

This would indicate that the Class 319 Flex could do a round trip without refuelling.

The route is currently worked by eleven two-car Class 158 trains and thirty three-car Class 159 trains and they take three and a half-hours for each hourly service between London Waterloo and Exeter St. Davids.

The Class 319 Flex train has a comparable speed to the Class 158/159 trains on diesel and is ten mph faster, when running on electricity.

I don’t think that the trains would be used all the way to Exeter, as they are not really designed for a journey of that length, but there may be other places where they could be ideal.

  • Running between London Waterloo and Salisbury to increase the frequency, where they might save upwards of fifteen minutes between Basingstoke and Waterloo, as they are faster than the diesel Class 158/159s.
  • Running the hourly circular service from Salisbury to Chandlers Ford via Southampton, which has sections of electrified line, where they could replace Class 158/159s.
  • Existing lines like the Lymington Branch, where they could replace Class 158/159s
  •  Reopened lines like the Fawley Branch,  Ludgershall Branch and the Swanage Railway.
  • New services like Portsmouth Harbour to Salisbury via Southampton and Romsey.

It could be that some selective electrification like Southampton to Romsey could be very beneficial.

 

 

 

 

 

March 5, 2017 Posted by | Travel | , , , , , , , , | 1 Comment